查詢結果分析
相關文獻
- 氣體反壓與動態模溫協同控制應用於超臨界微細發泡射出成型成型品品質改善之研究
- 模內氣體反壓與動態模溫協同控制應用於PS超臨界微細發泡射出成型機械性質之研究
- 純鈦金屬及基底金屬之表面分析與撕裂強度比較
- Effects of Surface Roughness on the Elastic-plastic Contact between the Fractal Rough Surface and a Plane
- 製程參數對精密陶模強度、尺寸精度、表面粗糙度、透氣性之影響
- 探針尖端曲率半徑對測量粗糙表面之影響
- 表面粗糙度對板內熱傳導溫度分佈的影響
- Synthesis of Uniform and Large-Area Polycrystalline Diamond Films Using Microwave Plasma Chemical Vapor Deposition System
- 有機發光二極體用ITO
- 表面粗糙度量測參數之新趨勢
頁籤選單縮合
| 題 名 | 氣體反壓與動態模溫協同控制應用於超臨界微細發泡射出成型成型品品質改善之研究=Part Quality Improvements during Microcellular Injection Molding Process via a Control Mechanism of Gas Counter Pressure and Mold Temperature Variation |
|---|---|
| 作 者 | 廖威量; 林明俊; 簡仁德; 陳夏宗; | 書刊名 | 桃園創新學報 |
| 卷 期 | 32 2012.12[民101.12] |
| 頁 次 | 頁57-72 |
| 分類號 | 467.41 |
| 關鍵詞 | 超臨界微細發泡射出成型; 氣體反壓; 模溫控制; 表面粗糙度; 氣泡尺寸; Microcellular injection molding; Gas counter pressure; Mold temperature control; Surface roughness; Cell size; |
| 語 文 | 中文(Chinese) |