查詢結果分析
相關文獻
- 地震誘發坡地崩塌之數值模擬及穩定性評估
- Modified Finite Element Solutions for Planar Entry Flow of an Oldroyd-B Fluid
- 機車安全帽之動態有限元素分析
- 有限元素法於運動器材之應用
- Application of High-Order Least-Squares Finite-Element Method for Second-Order Partial Differential Equations
- 有限元素法在塔式起重機結構強度之分析
- 地下電纜載流量之研究
- 多孔性披覆對人工髖關節置換後之應力遮蔽效應之影響
- 有限元素法在工程上的應用
- 有限元素法應用於複合材料補強混凝土結構行為之研究
頁籤選單縮合
題名 | 地震誘發坡地崩塌之數值模擬及穩定性評估=Numerical Evaluations on Stability of Slopes Subjected to Earthquake Loading |
---|---|
作者 | 林德貴; 王勝賢; 張光宗; Lin, Der-guey; Wang, Sheng-hsien; Chang, Kuang-tsung; |
期刊 | 中華水土保持學報 |
出版日期 | 20090300 |
卷期 | 40:1 2009.03[民98.03] |
頁次 | 頁1-21 |
分類號 | 432.73 |
語文 | chi |
關鍵詞 | 有限元素法; 動態應力穩定分析法; 臨界加速度; 累積位移量; Finite element method; Dynamic stress stability analysis; Critical acceleration; Accumulative displacement; |
中文摘要 | 本研究採用二維有限元素法動態應力穩定分析法,來建立一套邊坡受地震力作用時 之穩定性評估模式。首先,採用小型振動台模型實驗之實驗成果進行數值模擬並檢核數值程序 之可靠性及有效性。隨之,依據中央氣象局921 地震記錄資料選用三種地震加速度歷時曲線, 其編號分別為E5、E6 及E7 來進行虛擬邊坡之受震分析。在分析中,此三種歷時曲線分別用 來代表地震強度I=5 級、6 級及7 級之相當地震力輸入資料。另外,在三種地震力作用模式下, 針對地層材料、邊坡坡度、邊坡高度等各種穩定性影響因子進行參數研究後,再依據量化分析 成果,即受震邊坡之臨界加速度及累積位移量,來評估各影響因子對地震誘發邊坡破壞潛勢之 影響度。 |
英文摘要 | Using two dimensional finite element method of dynamic stress stability analysis, this study establishes a stability evaluation model of hill slope during earthquakes. First, the experimental results of a small scale shaking table test were used to calibrate the reliability and effectiveness of the proposed numerical model and calculation procedures. Subsequently, three modes of earthquake acceleration time history curves entitled E5、E6 and E7 were selected from the data bank of the 921 earthquake in Central Weather Bureau and used as earthquake loading inputs for the dynamic stability analysis of man-made fictitious slopes. The E5、E6 and E7 are real time acceleration time history curves and can be used to represent the earthquake intensities I values equivalent to levels 5, 6 and 7 in Taiwan respectively. Through the input of three earthquake loading modes E5、E6 and E7, the parametric study of various influence factors on the slope stability such as stratum material, slope inclination and slope height can be carried out. At last, based on the calculated critical acceleration and accumulative displacement under earthquake loadings, the weighting of various influence factors on the failure potential of hill slope can be evaluated quantitatively. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。