查詢結果分析
來源資料
相關文獻
- 鐵-10 鋁-(10∼35)錳-1.0碳合金薄片鑄件的顯微結構分析
- 厭氧流體化床之生物膜顆粒層次模型及代謝活性試驗
- 鋼鋁片鍍層與化成塗膜表面分析技術之應用
- 硒化鎘奈米半導體晶體的合成及在薄膜製備上的應用
- Comparison of Upper Floret Development in Bisexual and Male Spikelets of Thuarea Involuta (Gramineae) with Scanning Electron Microscopy
- Treatment of High-Strength Nitrate Wastewater in Different Biological Denitrification Systems
- 黃槐(Cassia surattensis L.)雄蕊與雌蕊形態變異對結實之影響
- 場發射高分辨電子顯微鏡在揭示原子分辨率晶體缺陷上的應用
- 超導薄膜的電子顯微鏡研究
- 含銅合金鋼時效析出之電子顯微鏡組織研究
頁籤選單縮合
題名 | 鐵-10 鋁-(10∼35)錳-1.0碳合金薄片鑄件的顯微結構分析=Analysis of Microstructure on Fe-10Al-(10∼35)Mn-1.0C Alloy Sheet Castings |
---|---|
作者 | 趙志燁; 歐耿良; | 書刊名 | 鑄工 |
卷期 | 25:2=101 1999.06[民88.06] |
頁次 | 頁34-40 |
分類號 | 472.2 |
關鍵詞 | 鐵鋁錳碳合金薄片鑄件; 電子顯微鏡; Fe-Al-Mn-Calloy sheet casting; Electron microscopy; κ; κ'; DO[feb0]; |
語文 | 中文(Chinese) |
中文摘要 | 本文主要目的在探討錳成分介於 10 ∼ 35 %之間鐵鋁錳碳合金薄片鑄件的顯微 結構。 依研究結果顯示:(1) 鐵鋁錳碳合金薄片鑄件由金相顯微結構觀察得知:基地存在α +γ的雙相組織且α相區域隨錳含量的增加而減少; 當錳含為 35 %時, 基地仍存在 3.5 %的α相。(2) 經電子顯微鏡的觀察得知:γ相為γ+κ+κ ' 的混合區而α相為 DO3 + κ混合區,此為一般文獻所未發現的結果。 |
英文摘要 | The object of the present paper is to investigate the effects of Mn variation on microstructures of Fe-Al-Mn-C alloy sheet castings. Based on the present studies, it reveals that: (1)observation of Fe-10Al-xMn-1.0C sheet castings by optical microcopy: the matrixes of sheet castings exist dual phase α + γ and the ferrite (α ) phase region in the matrix of casting decreases with the increase Mn contents; when Mn contents is at 35%, the matrix still exist α phase region 3.5%. (2) observation of Fe-10Al-xMn alloy sheet castings by electron microcopy, a γ phase is mixed rigion of γ + κ + κ ' phases in the matrix of Fe-Al-Mn-C alloy steet castings, while that an α phase is mixed region of DO3+ κ phases. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。