查詢結果分析
來源資料
頁籤選單縮合
題 名 | A Study of Tool Path Generation for Multi-Axis NC Milling of a Sculptured Surface=多軸數值控制工具機切削雕刻曲面之刀具路徑研究 |
---|---|
作 者 | 薛堯文; 呂秀雄; | 書刊名 | 中國工程學刊 |
卷 期 | 20:3 1997.05[民86.05] |
頁 次 | 頁257-264 |
分類號 | 446.841 |
關鍵詞 | 刀具路徑; 五軸工具機切削; 後處理; Tool path; Five-axis NC machining; Postprocessing; |
語 文 | 英文(English) |
英文摘要 | 本文提出新的多軸工具機產生雕刻曲面刀具路徑的方法。新的刀具路徑是與參數 曲面之u軸夾一角度的一連串參數直線所構成,為了方便計算,假設刀具軸垂直刀具接觸工 件表面。從Bezier曲面模式,運用修正型DH矩陣可算出所要求的刀具位置與方位。本文發 展出一後處理器,將刀具位置轉換成真的數值控制資料,並模擬切削Bezier曲面之數值控 制資料。在給定的曲面與精度的要求下,發現兩旋轉軸的角度變化變小;使用球形銑刀切 削雕刻曲面時,刀具接觸點的數目亦會降低。 Hartenberg notation. A post-processor is developed in this paper to convert cutter location data to actual NC data. A simulation of the NC data for machining the Bezier surface is presented. For a given surface finish requirement, the number of cutter contact points is reduced to a sculptured surface machined with a ball-end cutter. |
本系統中英文摘要資訊取自各篇刊載內容。