查詢結果分析
來源資料
相關文獻
- 高強度合金鋼之動態撞擊行為分析與模擬
- Modified Finite Element Solutions for Planar Entry Flow of an Oldroyd-B Fluid
- 機車安全帽之動態有限元素分析
- 有限元素法於運動器材之應用
- Application of High-Order Least-Squares Finite-Element Method for Second-Order Partial Differential Equations
- 有限元素法在塔式起重機結構強度之分析
- 地下電纜載流量之研究
- 多孔性披覆對人工髖關節置換後之應力遮蔽效應之影響
- 有限元素法在工程上的應用
- 有限元素法應用於複合材料補強混凝土結構行為之研究
頁籤選單縮合
題名 | 高強度合金鋼之動態撞擊行為分析與模擬= |
---|---|
作者 | 李偉賢; 黃舜杰; |
期刊 | 力學 |
出版日期 | 19950900 |
卷期 | 11:3 1995.09[民84.09] |
頁次 | 頁253-260 |
分類號 | 440.365 |
語文 | chi |
關鍵詞 | 動態撞擊; 應力波; 撞擊破壞; 有限元素法; Dynamic impact; Stress wave; Impact fracture; Finite element method; |
中文摘要 | 近幾十年來,隨著計算機的快速發展和廣泛使用,有限元素法(Finite Element Method )已成為科學工程上數值分析的有力工具。本文即是利用有限元素法分析軟體 MARC ,以 Updated Lagrange Formulation ( U.L.F. )推導的彈塑性大變形理論對於 35NCD16 高強度合金鋼之動態撞擊行為, 進行分析與模擬。 在本研究中, 是以鎢穿甲材料、 AISI 4340 這兩種材料的平頭撞擊物分別在 20 m/s、50 m/s、75 m/s、100 m/s 四種速度下,正 向撞擊 35NCD16 平板。 由結果我們發現,撞擊速度以及撞擊體的材料性質對於平板的變形 有顯著不同的影響。 |
英文摘要 | In past few decades, finite element method (FEM) has become a powerful tool of numerical analysis in the areas of science and engineering by the fast development and broad use of computers. In this paper, the FE analytic computer code MARC is employed in the analysis and simulation of dynamic behavior of 35NCD16 high strength alloy steel subjected to impact loading conditions. The 35NCD16 plates are penetrated by the flat-ended projectiles of tungsten and AISI 4340 at normal incidence under impact velocities 20 m/s, 50 m/s, 75 m/s and 100 m/s. Our results show that impact velocities and material properties of projectiles have important effects on the deformation behaviors of plates. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。