查詢結果分析
來源資料
相關文獻
- 添加甲烷氣體對微波電漿不銹鋼軟氮化處理之影響
- 應用微波電漿進行不銹鋼表面氮化之研究
- Direct Simulation Monte Carlo of Monosilane Low Pressure Chemical Vapor Deposition
- 敏化304不銹鋼在高溫純水環境中應力腐蝕電化學雜訊反應
- Effect of Heavy Metals on the Degradation of Butyric Acid in Anaerobic Digestion
- 以不銹鋼電極處理高濃度氰化物之最佳操作條件探討
- AISI 304不銹鋼以PVD法披覆硬膜之耐蝕性研究
- 軋鋼及伸鐵業--不銹鋼板捲
- 歐盟的甲烷管制策略與掩埋場管制指令
- 不銹鋼護面(覆面)耐蝕銲接
頁籤選單縮合
題名 | 添加甲烷氣體對微波電漿不銹鋼軟氮化處理之影響=The Effect of CH4 on Microwave Plasma Nitrocarburized Stainless Steel |
---|---|
作者姓名(中文) | 宋大崙; 李連福; 初玉臣; 詹昕哲; 阮越潮; | 書刊名 | 龍華科技大學學報 |
卷期 | 33 2013.06[民102.06] |
頁次 | 頁1-7 |
分類號 | 440.365 |
關鍵詞 | 微波電漿; 不銹鋼; 電漿軟氮化; 甲烷; Microwave plasma; Stainless steel; Plasma nitrocarburizing; Methane; |
語文 | 中文(Chinese) |
中文摘要 | 本文主要係使用微波(2.45GHz)電漿反應系統,進行AISI 316 不銹鋼低溫電漿軟氮化處理,在軟氮化處理參數係以改變甲烷(CH4) 添加之濃度0~5%,混合於氫氣與氮氣比例為3:2 之腔體中,以腔體壓力1Torr、電漿功率700W、處理溫度450℃下進行處理時間80 分鐘,以探討不同CH4 氣體經軟氮化效果之影響。後續試片以X 光繞射光譜儀進行表面滲層組織結構分析、電子顯微鏡觀察試片斷面微細構造、能量發散光譜儀測量滲層縱深元素分佈情形、微硬度測定儀測量表面及滲層縱深硬度、非球面量測儀檢測表面粗糙度及耐磨耗試驗機實施耐磨耗試驗。 |
英文摘要 | This report discussed on that AISI 316 processed by plasma nitrocarburnization under microwave plasma. The parameters were 1 Torr, 700 watt, 450℃ for 80 minutes, different CH4 concentration (0~5%) that mixed with hydrogen and nitrogen (3:2). The sample were analysed by X-ray diffraction, scanning electron microscope, energy dispersive spectrometer, micro hardness, aspheric tester. The sample treated under 3% CH4 concentration performed the better physical properties that other samples. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。