查詢結果分析
相關文獻
- Using the Inverse Method for Estimating External Forces from Structural System
- 斷裂式有限元素分析法之向量化加速計算
- Investigation of Input Forces Estimation of a Cantilever Beam Including the Consideration of Nonlinearity
- Modified Finite Element Solutions for Planar Entry Flow of an Oldroyd-B Fluid
- Torsional Vibration Analysis of a Damped Shaft System
- 汽機葉片之機械力學分析研究
- 通勤者在平面道路與捷運路網上之運具與路線選擇
- p-Version Space-Time Least-Squares Finite-Element Method for Shallow-Water Equations
- T-型模具之有限元素法PID溫度控制分析
- 股脛關節之有限元素接觸應力分析
頁籤選單縮合
題 名 | Using the Inverse Method for Estimating External Forces from Structural System=結構系統採用逆向方法估測外力之研究 |
---|---|
作 者 | 賀增原; | 書刊名 | 中國造船暨輪機工程學刊 |
卷 期 | 31:4 2012.11[民101.11] |
頁 次 | 頁205-213 |
分類號 | 444.3 |
關鍵詞 | 加速計; 卡爾曼濾波器; 有限元素法; 平均加速度法; 遞迴最小平方法; Accelerometer; Kalman filter; Finite element method; Average acceleration method; Recursive least square algorithm; |
語 文 | 英文(English) |
中文摘要 | 本文模擬加速計數據在不同時域,探討結構系統位移及外力估測量。特別是處理在外力是未知的情況。結構的系統是由加速計與樑(桁架)所構在,整理系統成統御方程式。接著,運用有限元素法,將統御方程式離散成為矩陣式,然後利用平均加速度法將矩陣式,建構成卡爾曼濾波器的狀態方程式與量測方程式。卡爾曼濾波器對於外力趨勢主要採用預測、更新與濾波的步驟。最後,採用遞迴最小平方法去降低介於量測與估測外力的誤差,以求出未知外力,同時藉由不同時域,外力作用在樑(桁架)特定的位置,進行數值模擬探討與分析,可以展現目前方法正確性。 |
英文摘要 | This paper investigates to predict the non-measurable displacement and forces of the structural system in time histories from accelerometer simulated records. It deals specifically with the situation where the external forces are unknown. The accelerometer and beam (truss) were modeled as a structural system in order to get a system governing equation. The matrix representation of governing equation of the structural system was constructed by the finite element method. Then the matrix representation was transformed to state equation and measurement equation of the Kalman filter by using the average acceleration method. The Kalman filter was adopted to predict, innovate and filter for the estimable displacement without external forces. Then using the recursive least square algorithm to decrease error between measurement and estimable of the external forces, therefore this paper finally got the estimable external forces. The accuracy of the current method is demonstrated by the numerical simulations for the external forces applied at the specific location of the beam (truss) in time histories. |
本系統中英文摘要資訊取自各篇刊載內容。