查詢結果分析
來源資料
相關文獻
- Dynamic Design of Beams Using Soft Tuning
- A Transfer Matrix Method Based on Lund-Orcutt Approach for Torsional Vibration of Rotor Systems
- Free Vibration Analysis of Beams Carrying Concentrated Elements Using CTMM and LTMM
- 求解附帶任意個彈簧-質量懸吊系統之均勻矩形平板的自然頻率
- Torsional Vibration Analysis of a Damped Shaft System
- 雙截面非均勻旋轉樑的自然振動頻率分析
- 利用餘式定理求解狀態轉移矩陣
- 振動學教具之製作
- 冷軋產品振動輥痕的成因分析及改善
- 小波理論應用結構振動訊號與阻尼比分析之研究
頁籤選單縮合
題名 | Dynamic Design of Beams Using Soft Tuning=以軟調法做樑之動態設計 |
---|---|
作 者 | 林海平; | 書刊名 | 科學與工程技術期刊 |
卷期 | 6:2 2010.06[民99.06] |
頁次 | 頁9-15 |
分類號 | 440.15 |
關鍵詞 | 軟調整; 自然頻率; 轉移矩陣; 特徵方程式; Soft tuning; Natural frequency; Transfer matrix; Characteristic equation; |
語文 | 英文(English) |
中文摘要 | 本文主要提出一方法使樑結構之自然頻率調整至一指定頻率值。通常結構勁度改變,其自 然頻率亦隨之而變。增加結構勁度能使結構加強;相同的,使結構減弱亦可調整其自然頻率。 本文使用人為加一裂縫至樑結構,使樑結構之自然頻率調至一指定之頻率值。先使用轉移矩陣 法得系統之特徵方程式,再利用此特徵方程式調整此系統之動態特性。本文並附實例說明及實 驗驗證。 |
英文摘要 | A technique for shifting the natural frequencies of beam structures to designated values by using a soft-tuning method is proposed. When the stiffness of beams is changed, the natural frequencies are also altered. Structural stiffness can be increased by enhancing the structures, e.g., strengthening them. Similarly, the stiffness can also be reduced by softening the structures. The natural frequencies can be shifted to the desired values by tuning the depths and locations of cracks, the procedure which is proposed in this report. This method utilizes a transfer matrix technique to obtain an analytical characteristic equation of the system, on which the dynamic frequency tuning is based. Two examples using this method are demonstrated and experimentally validated. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。