查詢結果分析
來源資料
頁籤選單縮合
題 名 | 在氟化銨中以光電化學法蝕刻n-Si(100)單晶表面製作微米溝槽=Preparation of Macro Trenches on Si(100) by Photo-electrochemical Etching in Ammonium Fluoride Solution |
---|---|
作 者 | 林景崎; 陳韋旭; 賴建銘; 楊仁泓; 鄭文達; 蔡明蒔; | 書刊名 | 防蝕工程 |
卷 期 | 20:4 民95.12 |
頁 次 | 頁353-361 |
分類號 | 448.59 |
關鍵詞 | n-型Si(100)單晶; 光電化學蝕刻; 氟化銨; n-type(100) silicon; Photo-electrochemical etching; Ammonium fluoride; |
語 文 | 中文(Chinese) |
中文摘要 | 本研究以光電化學法在在n-型(100)矽單晶上,採用不具毒性的氟化銨蝕刻液,蝕刻出微米級溝槽結構。陽極極化法及定電位蝕刻可以用來探討氟化銨溶液中,外加電壓與試片圖案間距對蝕刻速率及蝕刻形貌的影響。研究結果顯示:在預蝕刻圖形問距為110µm,若改變蝕刻電位由0.1V增加到0.8V,則蝕刻所得之結構其孔壁厚度由32µm增加至90µm。在外加電位為0.8V時,若改變預蝕刻圖形間距在60~170µm範圍,則間距60、80及110µm試片可以製作出孔壁筆直之溝槽結構,但間距140及170µm試片,蝕刻孔洞發生擴孔,此現象之差異可由電場與空間電荷區分佈之差異來解釋。 |
英文摘要 | Fabrication of macro-trenches on n-type silicon in the ammonium fluoride solution by photo-electrochemical etching has been investigated in this work. Effect of applied voltage and the pitch of pores were discussed in ammonium fluoride solution by dc-potentiodynamic polarization and potentiostatic etching. For the pattern with a pitch of 110µm, the wall width of the etching structures increases from 32µm to 90µm when the etching voltage increases from 0.1 V to 0.8 V. For the etching conducted at 0.8 V, we obtained trenches in vertical walls as the pattern with a pitch less than 110µm (e.g., 60, 80 and 110µm) but in curved walls for the pattern with a pitch higher than 110µm (e.g., 140 and 170µm). This difference in trench morphology is delineated by different distribution for the strength of electric field and the space charge regions. |
本系統中英文摘要資訊取自各篇刊載內容。