查詢結果分析
相關文獻
- 漸開線齒輪應用嚙合轉動診斷齒輪誤差之研究
- MATLAB檢測滾動齒輪最佳壓力值之研究
- 齒輪轉動儀升級對品質特性之研究
- Estimation of Impact Frequency Due to Backlash in Transmission Systems With Spur Gears
- Analysis of the Kinematic Error of a Face-Gear Harmonic Drive
- Measurement of Individual Errors of Parallel Axis Gears Using Single Flank Rolling Test
- 如何正確選擇押出機的心臟--齒輪箱
- Computer-Aided Structural Synthesis of One-Degree-of-Freedom Geared Kinematic Chains
- 探討平版印刷機軸承、齒輪的磨損對印刷品質的影響
- 有間隙齒條-齒輪連桿機構之動力解析
頁籤選單縮合
題名 | MATLAB檢測滾動齒輪最佳壓力值之研究=The Research of the Inspection in the Rotation Gear to Pressures Optimization in Matlab |
---|---|
作者 | 施儀良; 謝宏榮; | 書刊名 | 中華技術學院學報 |
卷期 | 22 2001.03[民90.03] |
頁次 | 頁49-74 |
分類號 | 446.0132 |
關鍵詞 | 齒輪; 轉動偏差; 偏擺誤差; 齒間誤差; Gear; Rotational deviation; Rotational concentricity error; Tooth to tooth error; |
語文 | 中文(Chinese) |
中文摘要 | 為了提高齒輪檢測功能,本研究利用囓合齒輪在無齒隙狀態下滾動,產生齒輪與齒輪間中心距誤差Aa",由於徑向壓力是影響軸中心距位移的主要因素,必然存在有一個最佳壓力值範圍,經多次測試與分析獲得一結論,此結論包括三個參數,分別為轉動偏差Fi"、偏擺誤差Fr"和齒間誤差fi",提供日後齒輪製程的一種簡易模式與設計參考。 |
英文摘要 | In order to increase the inspection function of rotating gears, by taking the advantage of non-backlash state was used to produce central distance error Aa", Because the radius pressure is the primary factor to influence the value of Aa", therefore they must have a optimized pressure range. The result was derived from many times of testing and analysis. This result contains three parameters which are rotational deviation Fi", rotational concentricity error Fr" and tooth to tooth error fi", respectively。The proposed model is expected to provide the gear industry an easy way for manufacturing process and further planning。 |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。