查詢結果分析
相關文獻
- 齒輪轉動儀升級對品質特性之研究
- 漸開線齒輪應用嚙合轉動診斷齒輪誤差之研究
- MATLAB檢測滾動齒輪最佳壓力值之研究
- 小模數齒輪箱之製造技術
- Estimation of Impact Frequency Due to Backlash in Transmission Systems With Spur Gears
- 蘋果彈性模數衰退模式之研究
- Analysis of the Kinematic Error of a Face-Gear Harmonic Drive
- Measurement of Individual Errors of Parallel Axis Gears Using Single Flank Rolling Test
- 如何正確選擇押出機的心臟--齒輪箱
- 輕質骨材堆積體單位重與孔隙率
頁籤選單縮合
| 題 名 | 齒輪轉動儀升級對品質特性之研究=The Research of the Upgrade in the Gear Rotation Instrument for Quality Character |
|---|---|
| 作 者 | 施儀良; 謝宏榮; | 書刊名 | 中華技術學院學報 |
| 卷 期 | 30 2004.06[民93.06] |
| 頁 次 | 頁219-236 |
| 分類號 | 446.886 |
| 關鍵詞 | 齒輪; 模數; 轉動偏差; 偏擺誤差; 齒間誤差; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 本文是經由使用SAMPUTENSILI齒輪轉動儀,同時採用該儀器檢測之轉動偏差Fi"、偏擺誤差Fr"、和齒間誤差fi"等綜合誤差值,來研究徑向壓力與檢測值的關係。分析後;提出該轉動儀承載扭力,適合於檢測模數2以下之齒輪,與檢測時承受壓力,適合於550g以下之徑向壓力。在這個範圍內檢測,能維持較穩定的性能。本文亦建議,能將固定之徑向壓力,改進為可調整式之徑向壓力。應該會提高快速檢測時之功效,確實提升齒輪檢測之品質特性,及判斷齒輪級數更精準之性能,使該轉動儀獲得有效的升級。 |
| 英文摘要 | The purpose of this research is to use the Samputensili rotating instrument. During the research, some inspection values have been used are as follows; Fi-rotating deviation, Fr-rotational concentricity error, and fi-tooth to tooth error. This paper is focused on the relation between the change of diameter pressure and inspection values. After analyzing, it turns out that the largest loading torsion of a rotation instrument will best to work under a module 2's gear. And its greatest loading pressure will be best under 550g ‘s diameter pressure. Under the circumstances, the inspection result will be remained most stable. After a further adjusting the diameter pressures to do the short time inspection in order to determine the grade and quality of a gear, which may upgrade the rotating instrument. |
本系統中英文摘要資訊取自各篇刊載內容。