查詢結果分析
來源資料
頁籤選單縮合
題 名 | 沃斯回火球墨鑄鐵機械性質的預測=Prediction the Mechanical Properties of Austempered Ductile Iron |
---|---|
作 者 | 溫東成; | 書刊名 | 中華技術學院學報 |
卷 期 | 20 2000.03[民89.03] |
頁 次 | 頁61-73 |
分類號 | 440.363 |
關鍵詞 | 沃斯回火球墨鑄鐵; 麻田散鐵; 沃斯肥粒鐵; 機械性質; Austempered ductile iron; Martensite; Ausferrite; Mrechanical properties; |
語 文 | 中文(Chinese) |
中文摘要 | 本文以定量方式分析回火後ADI組織中各組成相對機械性質的影響並建立可預測機 械性質的模式。 結果顯示強度與硬度受沃斯回火溫度影響較大,延性與�版坅h同時受沃斯回火溫度與沃斯回 火時間影響。強度與硬度在高溫 ADI 由麻田散鐵控制,在低溫 ADI 則受麻田散鐵與沃斯肥 粒鐵控制。延性與�版呇b麻田散鐵含量小於 20% 時由麻田散鐵控制,含量大於 20% 時則由 沃斯肥粒鐵控制。 所建立的模式在麻田散鐵含量小於 20% 時對各機械性質都有準確的預測 結果。 |
英文摘要 | This paper aims to study the influence of microstructure on mechanical properties of an austempering ductile iron mixtures of tempered martensite and ausferrite. Than a model is proposed to predict the mechanical properties. The results show that strength and hardness were more sensitive to austempering temperature while ductility and toughness were sensitive to both of austempering temperature and austempering time. Strength and hardness were determined by martensite in upper ADI and that were determined by both of martensite and ausferrite in lower ADI. Ductility and toughness were control by martensite when the volume fraction of martensite in ADI was less than 20%, while the martensite content was large than 20% the ductility and toughness were control by ausferrite. The model that proposed in this paper had a good agreement with experimental data in predicting the mechanical properties of ADI for martensite content less than 20%. |
本系統中英文摘要資訊取自各篇刊載內容。