查詢結果分析
來源資料
相關文獻
- 熱軋SUS304不鏽鋼薄板軋延
- A356鋁合金與不鏽鋼嵌件鑄造接合性質之研究
- 肥粒鐵型及麻田散鐵型不鏽性複合鋼焊接的要點
- 改變預軋密度對抗靜電針軋不織布物性之探討
- 應用超音波量測薄層系統的材料常數
- 開孔型防波堤透過率之研究
- 不鏽鋼板捲
- 不同不銹鋼纖維含量及層數對不織布體積電阻的影響
- On Some Species of Hymenosomatidae (Crustacea: Decapoda: Brachyura) from China, with Description of a New Species of Elamena and a Key to the Chinese Species
- Fracture Propagation of Anisotropic Plates by the Boundary Element Method
頁籤選單縮合
題名 | 熱軋SUS304不鏽鋼薄板軋延=Thin Hot Strip Rolling of Stainless SUS304 |
---|---|
作 者 | 陳明發; 趙賜川; | 書刊名 | 技術與訓練 |
卷期 | 24:4=197 1999.08[民88.08] |
頁次 | 頁64-70 |
專輯 | 製程研究及應用 |
分類號 | 454.8 |
關鍵詞 | 不鏽鋼; 薄板; 熱軋技術; 溫度模式; 軋延力模式; Stainless; Thin thickness; Hot rolling technology; Temperature model; Force model; |
語文 | 中文(Chinese) |
中文摘要 | 因應市場需求,SUS304不鏽鋼薄板(小於2.00mm)將可能成為中鋼的熱軋產品,為 此二號熱軋工場正在發展此類產品的軋延技術。此技術所採用的方法包括建立精確的軋延模 式和控制適當的製程參數等,在軋延過程中執行這些方法,可以降低因模式誤差和製程條件 的資料誤差所引起的不良軋延效應,進而使工程師能確保製程的穩定性。本文將藉由試軋資 料說明此技術應用在二號熱軋工場的不鏽鋼薄板( 2.00mm )軋延結果,並印證此技術可得 到較高精度的厚度控制。 |
英文摘要 | For request of rolling markets, thin SUS304 stainless (less than 2.00mm ) would be one of hot rolling products at China Steel Corporation (CSC). Hence, The technology for rolling such class of products has been developing at the No.2 hot strip mill of CSC. The methodologies used in this technology include construction of accurate rolling models, control of proper process parameters...etc. In rolling the thin SUS304 stainless, those methodologies are applied, and then the effect of the modeling and process data errors can be reduced. Therefore, the engineers can make sure of the safe stability of the rolling process. The paper will Present the results of 2.00 mm SUS304 test rolling, and demonstrate that small deviation of the strip thickness can be reached by using the rolling technology developed. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。