查詢結果分析
來源資料
頁籤選單縮合
題 名 | 變壓器絕緣紙劣化之分析方法=Test Methods for Evaluating Degradation of Electrical Insulating Paper |
---|---|
作 者 | 陳錫金; 林恆德; 陳耀武; 何立仁; 賴政宏; | 書刊名 | 台電工程月刊 |
卷 期 | 597 1998.05[民87.05] |
頁 次 | 頁84-92 |
分類號 | 448.39 |
關鍵詞 | 絕緣紙; 絕緣油; 平均聚合度; 抗張強度; 糠醛; 介電強度; Insulating paper; Insulating oil; Degree of polymerization; Tensile strength; Furfural; Dielectric strength; |
語 文 | 中文(Chinese) |
中文摘要 | 在大型電力變壓器中,絕緣紙劣化與使用運轉壽命息息相關,其中平均聚合度, 抗張強度,糠醛及其衍生物含量及介電強度等四項指標,將是評估絕緣紙劣化之關鍵性工具 。 本文主要為建立上述四項指標之測試分析過程, 其中平均聚合度分析涵蓋樣品前處理、CED 配製及黏度分析等步驟之建立。抗張強度分析包含樣品前處理及拉力量測之過程;糠醛及其 衍生物分析則包含油樣萃取處理,校正曲線建立,HPLC 分析過程; 最後絕緣紙介電強度量 測包含電極處理, 油及紙樣品前處理及分析等步驟。 糠醛分析可得 2%RSD, 偵測極限在 0.02ppm 以內,另外平均聚合度,抗張強度及介電強度等分別可得到 0.7%, 2.9% 及 7.9% 之 RSD。 |
英文摘要 | Degree of polymerization, tensile strength, furfural analysis and dielectric strength are key parameters for evaluating deterioration of insulating paper impregnated in transformer oil. This article describes the sampling and testing methods for the items mentioned above. They includes sample treatment, calibration and analysis. According to these methods, analysis can give 2% RSD and 0.02ppm of detection limit. The other three items give 0.7%, 2.6% and 7.9% of RSD respectively. |
本系統中英文摘要資訊取自各篇刊載內容。