查詢結果分析
來源資料
頁籤選單縮合
題名 | 鎳基自熔合金熔射層穴蝕特性及應用 |
---|---|
作者 | 吳建德; 鍾長祥; 顧志耀; 吳沂庭; 周貞夫; 彭煃政; | 書刊名 | 台電工程月刊 |
卷期 | 561 1995.05[民84.05] |
頁次 | 頁1-10 |
分類號 | 448.2 |
關鍵詞 | 高速火焰熔射; 穴蝕; 鎳基自溶合金; 導翼; 尾水管; High velocity oxy-fuel spray; HVOF; Cavitation; Ni based self-fluxed alloy; Guide vane; Draft tube; |
語文 | 中文(Chinese) |
中文摘要 | 水力電廠水輪機組常受到水流的作用而產生嚴重的穴蝕情形。本研究係 利用高速火燄熔射技術(HVOF Spraying),於410不�袗�上噴塗一層約180±10μm 厚度之NiCrBSi自熔合金,探討塗層性質對穴蝕的影響。本實驗分為兩部份:第一 部份在塗層熔射狀態(assprayed)觀察不同送粉速率與穴蝕的關係,第二部份再對 最佳送粉率試片進行不同溫度之熔融熱處理(fusing treatment),經熱處理之塗層組 織為一鎳基/硬化相析出物均勻結構。 在參考ASTM G-32超音波振盪法穴蝕測試中,發現非熔融狀態塗層抗穴蝕能力與 塗層鍵結力有密切關係,而經熔融熱處理者則與其硬度有關。 根據實驗的結果,本研究已在德基及青山電廠進行實件施工,包括導翼及尾水 管,熔射施工流程及塗層檢驗的記錄,將於水輪機停機檢修時作追蹤檢驗。 |
英文摘要 | Cavitation is a major cause of mechanical devices failurein hydraulic turbines. This research ultilizes high VelocityOxy - Fuel ( HVOF ) Spraying to eveluate the performance ofNiCrBSi self-fluxing coating. Firstly, the influence of coatingquality exerting on cavitation resistant in different powder feedrates was studied. Secondly, the fixed powder feed rate coatings were heat treated under different fusing temperature tomake a uniform Ni-based matrix/precipitate coating microstructure. The results of ASTM - G32 vibratory cavitation test showthat cavitation resistance were increased with bondingstrength of assprayed coating, and related with coatingmicrohardness after fusing treartment. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。