頁籤選單縮合
題 名 | A Study of High Efficiency Turning Tools=高效率切削刀具之研究 |
---|---|
作 者 | 張充鑫; | 書刊名 | 宜蘭農工學報 |
卷 期 | 6 1993.06[民82.06] |
頁 次 | 頁108-142 |
分類號 | 446.893 |
關鍵詞 | 刀具; 切削; 積屑邊緣; 銀白色切屑; 斜交切屑; 主切刃磨削負稜; Built-up edge; Silver-white chip; Oblique cutting; Chamfered main cutting edge; |
語 文 | 英文(English) |
中文摘要 | 本文乃利用自行設計與製造的車刀把,鎖上碳化鎢刀片以磨成各種特定的刀角, 並在主切刃處磨削負稜後,使刀具在切削時能伴隨產生第二切屑(積屑刃緣),藉著其在車 削過程中所造成的剪切面積變化,以建立單鋒刀具的新切削力量模式,並利用最小能量法以 預測三維切削力量,結果顯示理論值與實驗值極為接近。 切削實驗中,除了切削碳鋼外並做純鋁的切削,以研究第二切屑的生成機構,最佳的刀具狀 及諸角度,及第二切屑與刀具幾何形狀之關係等。 |
英文摘要 | The holders of special tools and their geometries are designed and discussed in the initial stages of this paper. The tool holders are milled and ground by ourselves which make them be various specifications from medium-carbon steel bars. A new force model for a single-point tool with the chamfered main cutting edge is proposed in the present study and can result in tools with a built-up edge (BUE). The results of the turning experiments show that the experiment data are close to the theoretical values. Cutting experiments were conducted by using pure aluminum and carbon steel to study the mechanism of the secondary chip, and the ideal tool geometries of the relationship between the shapes of secondary chip and tool geometries were observed. |
本系統中英文摘要資訊取自各篇刊載內容。