查詢結果分析
相關文獻
- 影響紙張結構因子之研究(1):抄造條件對手抄紙交織之影響
- 紙張影像質地分析之研究(1)--並生矩陣法
- 影響紙張結構因子之研究(2):備漿條件對手抄紙交織之影響
- 影像分析系統用於紙張結構之研究
- 可變結構控制系統在橋樑結構控制之研究
- 影像分析系統用於纖維形態及紙張結構之研究
- Classification of Schooling Structures of Engraulis japonica by Processing the Hydroacoustic Signal and Discriminant Analysis
- 實驗室染色紙張抄造法
- 紙漿與紙張製造專論:第2 篇抄造工程: 第2 章成形部(Forming Part)或網部(Wire Part)
- 紙漿與紙張製造專論:第2 篇抄造工程: 第2 章成形部(Forming Part)或網部(Wire Part)
頁籤選單縮合
題名 | 影響紙張結構因子之研究(1):抄造條件對手抄紙交織之影響 |
---|---|
作者 | 王益真; 吳文棧; 谷雲川; | 書刊名 | 林業試驗所研究報告季刊 |
卷期 | 7:3 1992.09[民81.09] |
頁次 | 頁259-272 |
分類號 | 476.1 |
關鍵詞 | 手抄紙; 交織; 抄造; 紙張; 結構; |
語文 | 中文(Chinese) |
中文摘要 | 本研究探討以影像分析系統評估漿料及抄造條件對於手抄紙交織之影 響。以臺灣二葉松、玫瑰桉及相思樹為試驗材料,在不同條件下抄造手抄紙,再 以影像分析配合目測評估紙張交織之優劣,並由試驗結果之統計分析決定各因子 之重要性及其相互作用。先前研究已知:a.自行備料抄造之手抄紙,在相同原料 及抄造條件下,紙張基重與吸光度呈顯著的線性相關;b.較短纖維漿料所抄紙張 交織較佳,但若纖維長度相近,則柔軟性佳的纖維對紙張交織較為有利。 其他的觀察綜合如下: 1.抄紙時的排水速率愈慢,成紙的交織愈差。 2.提高漿料之溫度、濃度或沉降時間,均對紙張交織有不良影響。 3.以超音波震盪適度地產生微湍流,可有助於分散絮凝,但過小與過大的輸出功 率及震盪時間,均對紙張交織不利。 4.在2n完全因子階乘試驗中,以纖維長度對紙張交織影響最大,其次為沉降時 間、濃度、漿料溫度;而沉降時間及纖維長度與濃度之交互作用較明顯。 5.吸光度變異係數(COV)、影像灰階變異數(S2)、M/K交織指數(M/K FI)及目測修 正成對評分法(APS)四種紙張交織評估法中,變異係數及目測法受紙樣平均吸光 度之影響較大,而平均吸光度相當時,四種評估法所得之結果相近。 |
英文摘要 | An image analysis system was used to investigate the effects of fiber morphological properties and forming conditions on handsheet formation. Pulp stocks were prepared from Pinus taiwanensis, Eucalyptus grandis, and Acacia confusa. Handsheets were prepared at different forming conditions. The formation of the handsheets were then evaluated with the image analyser and pairwise visual ranking technique. Statistical analyses of the importance of each variable and interactions between variables were determined. It is already known from previous studies that handsheets prepared from the same pulp stock and forming condition showed a consistent linear relationship between gram-mage of the sheets and their light absorbance, and that sheets made from shorter fibers had better formations. For fibers of similar length, however, the more flexible ones gave better formations. Additional observations from this study include: 1.Slower drainage rates resulted in poorer sheet formation. 2.Increases in stock temperature, concentration, or settling time advsersely affected sheet formation. 3.Optimum microturbulence dispersed fiber flocs and improved sheet formation. Excessive or insufficient oscillation amplitude or time, however, created nonuniform sheets. 4.The assessment of a 2n full factorial experiment design indicated that fiber length is the most crucial parameter in paper formation, followed by settling time, stock concentration, and temperature. Setting time also had strong interactions with fiber length and stock concentration. 5.Among the four paper formation assessment methods, i.e., coefficient of variation (COV), varience (S2), M/K formation index (M/K FI), and modified all-pairs score (APS), the COV and look-through (modified APS) judgements are most affected by mean light absorbance. Under similar mean light absorbance conditions, all four methods gave similar results. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。