查詢結果分析
來源資料
相關文獻
- 中密度纖維板之研製(2):江某、臺灣赤楊、山黃麻、銀合歡為原料之纖維板製造
- 中密度纖維板之研製(3):麻六甲合歡、楓香、臭酸仔為原料之纖維板製造
- 中密度纖維板之研製(1):相思樹、木油桐為原料之纖維板製造
- 臺灣地區中密度纖維板與粒片板之物理性質分析
- 柳杉與粒片板及中密度纖維板釘接側向拉伸疲勞行為
- 單板樹種、厚度及貼面方式對單板貼面粒片板與中密度纖維板性質之影響
- New Zealand(新西蘭)的製材及乾燥和中密度纖維板應用技術
- 集成中密度纖維板做為家具接合材料之可行性評估
- 蛋白質-酚醛膠合劑之合成及其在木質複合板製造上之應用(2)--蛋白質-酚膠之中密度纖維板研製
- 速生樹種為原料之硬質纖維板研究(2):麻六甲合歡、臺灣赤楊、楓香、山黃麻為原料之硬質纖維板研製
頁籤選單縮合
題名 | 中密度纖維板之研製(2):江某、臺灣赤楊、山黃麻、銀合歡為原料之纖維板製造 |
---|---|
作者 | 藍浩繁; 黃耀富; | 書刊名 | 林產工業 |
卷期 | 10:1 1991.03[民80.03] |
頁次 | 頁35-49 |
分類號 | 474.5 |
關鍵詞 | 山黃麻; 中; 江某; 原料; 密度; 臺灣赤楊; 製造; 銀合歡; 纖維板; |
語文 | 中文(Chinese) |
中文摘要 | 繼續利用台灣連生樹種-江某,台灣赤楊,山黃麻及銀合歡之小徑木為原料,以製板之最佳條件(同第一報),研製中密度纖維飯。試驗結果如下:(1)解纖動力評估以銀合歡之電力總消耗量最大,江某,山黃麻次之,台灣赤楊最低(904>829>821>672kWh/OD Ton).(2)解纖後之纖維均以較粗大纖維形態存在(留存於14~48網目),其量佔總纖維量之59~83%為中密度纖維板之主組成。纖維之游離度為1~20 Defiberator.See.(3)按0.75比重,1 cm板厚之製板,以江某之成較最優,其板性如下:MOR為430 ± 75)kgf/cm^2, MOE為(2.8 ± 0.7)×10^4 kgf/cm^2,內聚力為(8.9+0.8)kgf/cm^2,木螺絲釘保持力為(69 ± 8.4)kgf,吸水厚度膨脹率為(17 ± 1.5)%,吸水率為(82 ± 8.3)%。 |
英文摘要 | Small-sized logs of Schefflera trees, Fonnosan alder, India-charcoal trema and Giant leucaena, the 4 fast-growing wood species in Taiwan are used as raw materials for MDF manufacture. The conditions used for this purpose are the same as the report 1. The results are summarized as followings: (1) The order of power expension for defibrizing of 4 species are Giant leucaena, Schefflera trees , Indiacharcoal trema and Fonnosan alder (904 > 829 > 821 > 672 kWh/ OD Ton). (2) The classified fibers are in the range of 14 ~ 48 mesh, and they take the 59 ~ 83% of the total weight. These fibers are the main component of MDF, and their freenesses are in the range of 12 ~ 20 Defiborator Sec. (3) The MDF with 1 cm thickness and 0.75 specific gravity made of Schefflra trees fibers is the most valuable one. Their properties are as following: MOR is (430 ± 75) kgf/cm^2 , MOE (2.8 ± 0.7) × 104 kgf/cm^2 , IB (8.9 ± 0.8) kgf/cm^2 , SHC (69 ± 8.4) kgf, The thickness swelling is (17 ± 1.5)%, Water absorption is (82 ± 8.3)%. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。