查詢結果分析
相關文獻
- 用三次元量測機與微電腦做平板凸輪的電腦輔助設計
- 平板凸輪及平移從動滾子之微電腦輔助設計
- CMM Inspection Planning from CAD Models
- 高精度螺旋運動之組裝定位凸輪機構電腦整合設計與製造技術
- Application of a Micro-CT Scan to Tooth Crown Dimensions Measurement and CAD Model Construction for Rapid Prototyping
- 凸輪電腦輔助設計、製造與教學
- 空間凸輪電腦輔助設計、製造及檢測之整合
- 高速平板凸輪設計CAD系統
- 滾齒凸輪機構之電腦輔助設計
- 微電腦輔助廢水處理流程最佳化設計
頁籤選單縮合
題名 | 用三次元量測機與微電腦做平板凸輪的電腦輔助設計 |
---|---|
作者姓名(中文) | 張士行; | 書刊名 | 技術學刊 |
卷期 | 3:1 1988.03[民77.03] |
頁次 | 頁27-32 |
分類號 | 446.888 |
關鍵詞 | 三次元; 凸輪; 平板; 設計; 量測機; 微電腦; 電腦輔助; |
語文 | 中文(Chinese) |
中文摘要 | 我們可用三次元量割機 (three dimensional coordinate measurement machine簡稱3-DCMM) 的探針取點式地量測出凸輪的輪廓外形,然後將這些資料輸入微電腦,再透過CNC工具機便可完成凸輪之複製工作。本文主要是舉例說明如何使用這軟體程式──「CHANG program」,根據一些數學上的技巧和電腦軟體上的技術,此程式可將量測數據繪出凸輪的形狀、位移、速率和加速率的運動曲線圖。一旦得到這些變數和幾何數據,我們可結合WTCM/CRIF (比利時的金屬工業發展中心) 的CAM程式,然後借助CNC切削加工中心,便可直接製造出與原來三次元量測機畫面上量測的凸輪直製品。 |
英文摘要 | Three dimensional coordinate measurement machines (3- DCMM) determine the dimensional quality of mechanical components by measuring the coordinate values of a number of points on the surface of the mechanical component (cam) under consideration. These coordinate values are then further processed by a microprocessor/computer to determine the component's (cam) geometrical parameters and curves. This paper illustrate show the software program, CHANG, is written to give the position, displacement, velocity and the acceleration curves of cams. Once these parameters are obtained, the CAM program, from the WTCH/CRIF institute, is linked to the CHANG program. By means of this linkage, one can generate, and punch tape to the manufacturer, cams which are nearly the same as the original measured on the 3- DCMM. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。