查詢結果分析
相關文獻
- Some Morphological and Mechancal Properties of Glass Fiber Filled PBT-EPR Polyblends
- The Toughness Behavior of Fiber Reinforced Concrete
- 多軸多層經編織物和非織物強化不飽和聚酯積層板受非穿透性衝擊破壞之觀察
- 玻璃纖維強化塑膠管之介紹及其管系設計
- 玻璃纖維強化塑膠管之介紹及其管系設計
- 利用玻璃纖維改良紙張性質之探討
- 玻璃纖維紗管軸自動回收系統
- Nylon12/Lcp聚摻合物之合成及結晶行為
- E-級玻璃纖維/環氧樹脂複合材料機械性質之研究
- Poly(ethylene-2,6-naphthalenedicarboxylate)與Nylon12聚摻合物
頁籤選單縮合
| 題 名 | Some Morphological and Mechancal Properties of Glass Fiber Filled PBT-EPR Polyblends=玻璃纖維補強聚摻合物的機械性質與形態學 |
|---|---|
| 作 者 | 陳中屏; 李育德; | 書刊名 | Journal of the Chinese Institute of Chemical Engineers |
| 卷 期 | 17:6 1986.11[民75.11] |
| 頁 次 | 頁377-384 |
| 分類號 | 440.34 |
| 關鍵詞 | 玻璃纖維; 聚摻合物; |
| 語 文 | 英文(English) |
| 中文摘要 | 聚丁烯對苯二甲酸酯的耐衝擊強度可經由加入乙烯-丙烯橡膠改良。但其模數,強度及熱變形溫度亦會相對降低。利用鈷六十珈瑪射線照射可以防止脫層現象並降低其耐衝擊強度。加入玻璃纖維於PBT/EPR聚摻合物中可改良上述之缺點而略增加耐衝擊強度。此外,耐衝擊的斷裂面利用掃描式電子顯微鏡觀察以了解其形態學及破壞現象。 |
| 英文摘要 | The impact resistance of polybutylene terephthalate (PBT) had been improved through blending with ethylene-propylene rubber (EPR). This improvement resulted in a reduction in modulus, strength and heat distortion temperature. Co□ γ-ray radiation treatment would prevent laminar peeling pheonmena, but reduce impact strength. The addition of glass fiber in PBT/EPR polyblend imparted improvement in modulus, strength and heat distortion temperature, however the impact strength was only marginally better than glass fiber reinforced PBT. The morphology and fracture machanism of PBT/EPR polyblend and PBT/EPR/Glass-fiber composite were invetigated using scanning electron microscopy to examine impact fracture surface and solvent-etched cut through surface. |
本系統中英文摘要資訊取自各篇刊載內容。