查詢結果分析
相關文獻
- 混合式真空鍍膜製程於車燈反射面之應用
- Analysis and Modeling of Hydrogen Permeation through Alumina Membranes with Finely Dispersed Palladium
- Permeation of Gases Through a Supported Alumina Membrane
- Study on Mechanical Properties of Silicon Oxide Gas Barrier Layer Deposited onto Flexible Plastic Substrates
- 利用電漿增強化學氣相沉積法於可撓式塑膠基材上製備有機/無機多層氣體阻障層結構
- 利用電漿增強化學氣相沉積法製作具高阻氣效能之有機矽基/氮氧化矽多對氣體阻障層結構
- 以電漿增強化學氣相沉積法製備氮氧化矽氣體阻障層之研究
- 鋼鋁焊接及鋁膜鋼
- 氣體阻障層結構沉積在圖案化基材表面階梯覆蓋性之研究
- 太陽能轉換技術再突破--高效率金屬吸收體
頁籤選單縮合
題名 | 混合式真空鍍膜製程於車燈反射面之應用=Applications of Hybrid Vacuum Metalizing Process for Car Light Reflectors |
---|---|
作者 | 倪子凌; 陳國政; | 書刊名 | 真空科技 |
卷期 | 28:3 2015.09[民104.09] |
頁次 | 頁32-39 |
分類號 | 472.16 |
關鍵詞 | 混合式真空鍍膜製程技術; 車燈反射面; 鋁膜; 電漿增強化學氣相沉積; Hybrid vacuum metalizing process; Car light reflector; Aluminum film; Plasma-Enhanced chemical vapor deposition; PECVD; |
語文 | 中文(Chinese) |
中文摘要 | 有鑑於全球汽車市場蓬勃發展及全球環境保護趨勢,大永真空科技將研發節能、環保的設備作為責任,於台灣產業界首創混合式真空鍍膜製程技術(Hybrid Vacuum Metalizing Process, HVMP),並將HVMP技術應用於DYPL-爐內塗佈專用型真空鍍膜機,其中,HVMP技術結合了PVD及PECVD製程。DYPL鍍膜機可以在同一真空腔體中完成底塗、反射面鍍膜及面塗等三道製程,徹底取代傳統車燈鍍膜的大氣噴塗製程,避免大量噴塗所造成的污染與浪費,可降低人力需求並大幅提高生產效率。本設備製程穩定、操作簡便,適合鍍製各種外觀複雜、幾何形狀的工件,如汽車反射燈罩、防曇燈罩、擋板、化妝品容器…等產品。 |
英文摘要 | In view of the global automobile market booming and the trend of environmental awareness, Dah Young has a responsibility to develop energy-saving and environment-friendly equipments. We have pioneered the development of a new HVMP (Hybrid Vacuum Metalizing Process) technology in Taiwan. The HVMP technology is a combination of PVD and PECVD that can be applied to our hybrid coating equipment "DYPL", which can carry out the base coating, reflector coating and top coating in the same evacuated chamber. There is no need to perform an air spray coating process, and it can enhance production efficiency, as well as avoid lacquer wasting and pollution to the environment. This coater can be applied to coat substrates of complex shapes, such as car light reflectors, anti-fog lampshade, bezels, etc. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。