查詢結果分析
來源資料
頁籤選單縮合
題 名 | 微量Sc對Al-Si-Mg合金特性影響=Effects of Trace Element Sc Trace Quantity Addition on the Properties of the Al-Si-Mg Alloy |
---|---|
作 者 | 杜讚發; 龍澤昇; 吳威德; | 書刊名 | 鑄造工程學刊 |
卷 期 | 40:1=160 2014.03[民103.03] |
頁 次 | 頁12-19 |
分類號 | 472.5 |
關鍵詞 | Al-Si-Mg合金; 鈧; T6熱處理; Al-Si-Mg alloy; Scandium; T6 treatment; |
語 文 | 中文(Chinese) |
中文摘要 | 本研究主要探討添加微量鈧(0.2-0.8wt%)對於Al-Si-Mg合金鑄造狀態及T6熱處理後微結構、硬度、韌性、阻抗性、拉伸強度及破斷行為的影響。利用光學顯微鏡、X光繞射(XRD)、掃描式電子顯微鏡(SEM)分析材料微結構,並用萬能試驗機及微硬度試驗機量測機械性質。實驗結果顯示,在A356.2鋁合金中添加0.4wt%Sc,可有效抑制樹枝狀晶粒成長,並獲得最佳的強度與硬度。 |
英文摘要 | The influence of trace 0.2-0.8 wt% scandium on the microstructures, tensile properties and fracture behavior of Al-Si-Mg alloys were investigated under as-cast condition and T6 treatment. The microstructure of alloys was observed by optic microscope (OM), X-ray diffraction (XRD), scanning electron microscope (SEM), and mechanical properties were measured. Experimental results show that the dendritic structure can be inhibited, when the scandium content is over 0.4 wt%, and the tensile strength and hardness can be optimal for the content of 0.4 wt% scandium. |
本系統中英文摘要資訊取自各篇刊載內容。