查詢結果分析
來源資料
相關文獻
- 磷酸三鈉對不鏽鋼SS625之除鏽研究
- 磷酸三鈉對SS316之除鏽之研究
- 鹼浴添加有機酸鹽和使用直流電與脈衝電流對鋁材陽極氧化之研究
- Application of Anodization followed by Rapid Thermal Treatment to Thin Gate Oxide Growth
- 原料肉經浸漬液處理對低脂中式香腸理化及貯藏壽命的影響
- 以室溫陽極氧化法成長高品質複晶矽上二氧化矽膜
- 鋁合金陽極氧化膜無氟寬溫封孔劑
- Anodic Oxidation Growth Kinetics of Silicon in Pure Water
- Ti-6Al-4V 合金氧化膜性質研究
- 陽極處理鈦金屬之特性研究
頁籤選單縮合
| 題 名 | 磷酸三鈉對不鏽鋼SS625之除鏽研究=A Study of Trisodium Phosphate to Remove Oxide Layer on Stainless Steel (SS625) |
|---|---|
| 作 者 | 白育綸; 鐘鶴華; 陳柏村; 賴政隆; | 書刊名 | 機械技師學刊 |
| 卷 期 | 6:4=24 2013.12[民102.12] |
| 頁 次 | 頁85-88 |
| 分類號 | 472.33 |
| 關鍵詞 | 除鏽; 磷酸三鈉; 陽極氧化; 動態極化曲線; SS625; Rust removal; Trisodium phosphate; Anodic dissolution; Dynamic polarization; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 本研究利用活化法和陽極氧化法將不鏽鋼SS625表面氧化層溶解脫落,改良過去酸洗除鏽製程以鹼性環保系統除鏽,改善酸性金屬廢液難處理的問題。電解除鏽程序分為兩個階段,第一階段為活化鏽皮表面,電解液為1M硫酸,第二階段為陽極氧化除鏽,電解液為1M磷酸三鈉,經由二階段除鏽程序,將不鏽鋼SS625之鏽皮除鏽。本研究用電子顯微鏡(SEM)、元素分析儀(EDX)、動態極化曲線(Tafel)分析表面鏽皮型態、組成與鏽皮分解特性。不同除鏽電流密度、電解時間與溫度均會影響SS625之除鏽率,其中電流密度影響最大。經實驗發現,當電流密度80A/dm2(ASD)、除鏽時間為70秒和除鏽溫度為60℃,除鏽率可達95%。 |
| 英文摘要 | In this study, oxidation layer on SS625 stainless steel is dissolved by alkaline pickling process, improving the oxide layer is removed. Electrolytic descaling procedure is divided into two stages, the first stage activation of the skin surface with 1M sulfuric acid anodizing oxide layer. The second stage, the electrolyte of 1M trisodium phosphate dissolve the oxides on SS625 stainless steel skin. In this study, using electron microscopy (SEM), elemental analyzer (EDX), dynamic polarization curves (Tafel) analyzed surface rust skin type, composition and decomposition characteristics. Different current densities, electrolysis time and temperature affect the dissolution rate of SS625. The experiment found that current density of 80A/dm2 (ASD), dissolution time of 70 seconds in the temperature is 60℃, rust removal rate of 95%. |
本系統中英文摘要資訊取自各篇刊載內容。