查詢結果分析
相關文獻
- 考量檢驗誤差和退貨成本下之MLP-2和精密檢驗的最適混合檢驗策略
- A Joint Inspection Policy between CSP-1 and Precise Inspection for Non-repairable Products under Inspection Errors and Return Cost
- A Mixed Inspection Policy for Csp-t and Precise Inspection Under Inspection Errors and Return Cost
- A mixed Inspection Policy for CSP-2 and Precise Inspection Under Inspection Errors and Return Cost
- 考慮檢驗誤差下不可修復組件之合格率為截取Weibull分配之貝氏檢驗模式
- 相同誤差下之多重檢驗最小成本模式
- Economic Specification Limits under the Inspection Error
- 在檢驗誤差影響下,子系統之機率性允差設計
- Joint Determination of Optimum Process Mean and Economic Specification Limits for Rectifying Inspection Plan with Inspection Error
- An Optimal Policy for CSP-1 with Inspection Errors and Return Cost
頁籤選單縮合
題名 | 考量檢驗誤差和退貨成本下之MLP-2和精密檢驗的最適混合檢驗策略=A Mixed Policy for MLP-2 and Precise Inspection under Inspection Errors and Return Cost |
---|---|
作者姓名(中文) | 于鴻福; 陳亭彣; | 書刊名 | 品質學報 |
卷期 | 20:1 2013.02[民102.02] |
頁次 | 頁115-136 |
分類號 | 494.568 |
關鍵詞 | 檢驗誤差; 退貨成本; 精密檢驗; 最適混合檢驗策略; MLP-2; Multi-level sampling plan with two sampling inspection levels; Inspection error; Return cost; Precise inspection; Optimal mixed inspection policy; |
語文 | 中文(Chinese) |
中文摘要 | 本研究的目的是要針對可維修產品,探討MLP-2(multi-level sampling plan with two sampling inspection levels)與精密檢驗之最適混合檢驗策略。更明確地說,在考量檢驗誤差與退貨成本下,以最大化平均單位利潤為目標,探討MLP-2之最佳清查個數(clearance number)和各層的抽樣頻率(sampling frequency),以及於MLP-2抽樣檢驗程序中未檢驗、判定為良品與不良品之產品,施予最佳精密檢驗之比率。分析結果顯示,MLP-2有兩種主要的檢驗策略:(1)一直執行百分百檢驗和(2)自百分百檢驗進入抽樣檢驗後即停止檢驗。而於MLP-2檢驗程序中未檢驗、判定為良品與不良品之產品,應施予精密檢驗之兩種主要比例為:0%和100%。 |
英文摘要 | Under the conditions that inspections in MLP-2 are not perfect and each defective shipped to the buyer will be fined a return cost, this paper investigates a mixed policy between precise inspection and MLP-2 for repairable products. By using the criterion of maximizing the unit net profit, the following decision variables are determined: (1) the optimal clearance number, (2) the optimal sampling frequency of each level, and (3) the proportions on which precise inspection should be taken for the defectives and the non-defectives identified in the procedure of MLP-2 and the non-inspected items. Analytical results indicate that there are two main inspection policies for MLP-2: "Continue 100% inspection" and "Stop inspection after 100% inspection;" besides, for the defectives and the non-defectives identified in MLP-2 and the non-inspected items, two main proportions which should be performed precise inspection are: 100% and 0%. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。