查詢結果分析
相關文獻
- 3D Numerical Simulation to Investigate the Influential Factors Causing Die Failure in Hot Aluminum Extrusion of Square Hollow Profile
- 複動化鍛造成形模具設計技術
- 銲接法造形鍛造模具技術
- 氣渦輪燃燒室之噴霧燃燒數值模擬
- 葛拉絲颱風(1994)及其受到臺灣地形影響之研究 第一部份:觀測分析
- A Numerical Simulation of the Circulation in the South China Sea--Preliminary Results
- 使用射出壓縮成型法於光學鏡片成型之製程技術研究
- 光碟片之射出成型技術
- 模具技術在身終生受用
- 地震震波研究及視覺表現(1)--數值模擬 Earthquake Simulation
頁籤選單縮合
題名 | 3D Numerical Simulation to Investigate the Influential Factors Causing Die Failure in Hot Aluminum Extrusion of Square Hollow Profile=以3D數值模擬檢視在熱鋁擠壓方型空心變量中導致沖模不良的影響因子 |
---|---|
作者姓名(外文) | Aue-u-lan, Yingyot; Khansai, Komet; | 書刊名 | International Journal of Science and Engineering |
卷期 | 2:2 2012.06[民101.06] |
頁次 | 頁11-17 |
分類號 | 472.5 |
關鍵詞 | 數值模擬; 熱鋁擠壓; 模具; Aluminum hot extrusion process; Die life improvement; Die stress analysis; FEM; Hollow profile; Numerical simulation; Porthole die; |
語文 | 英文(English) |
英文摘要 | Nowadays the aluminum alloys have been used worldwide in different industries, such as the building industry, automotive industry and aerospace industry. The demand of different cross-sectional aluminum profiles is still continuously increased to support the growth of different industrial sections. To produce these aluminum profiles, the design of the forming die plays a significant role to improve the part accuracy and production capability. Currently, there are many companies tried to improve performance of process and extend the die life by conducting different sets of experiments. This method is timeconsuming and so costly. Finite Element Modeling (FEM) just recently is used to design the product of the part. However, there are a few studies on the process parameters affected the die life. Therefore, this project focuses on the effect of the factors that could be caused of shorten die life, such as flow behavior, extrusion load, flow velocity, and temperature distribution. FEM was employed to simulate and investigate the effect of those factors on die stress. DEFORM 3D was used to simulate this hot extrusion process of aluminum square hollow profile size 1.7x1.7 inch. The simulation result of die stress was predictable and coherent with failure in real die that used to produce aluminum profile. Furthermore, this result was able to indicate, where is the weakest areas, which should be modified or adjusted die geometry to reduce die stress and improve die life. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。