查詢結果分析
來源資料
頁籤選單縮合
題名 | 噴覆成型及含鈧Al-10Zn-2Mg-1Cu-0.2Zr合金之微組織、機械性質及成型性的探討=Study on Microstructure, Mechanical Properties and Workability of Spray-Formed Al-10Zn-2Mg-1Cu-0.2Zr Aluminum Alloy Added with Sc |
---|---|
作者 | 王宣人; 蘇彥豪; 江俊憲; 曹紀元; 楊思誠; 洪衛朋; | 書刊名 | 鑄造工程學刊 |
卷期 | 30:4=123 2004.12[民93.12] |
頁次 | 頁10-17 |
分類號 | 472.5 |
關鍵詞 | 噴覆成型; 快速凝固; 應變硬化; Spray forming; Rapid solidification; Working hard; |
語文 | 中文(Chinese) |
中文摘要 | 高強度鋁合金為機械性質優良的合金,本研究之目的在利用噴覆成型的新製程技術,開發出高強度鋁合金的擠錠及相關應用之研究。根據相圖知道 Sc 在鋁基地中的固溶溫度約為655℃,所以容易產生細微之析出相而抑制晶粒粗大化,與Zn擴增固溶的效果,利用噴覆成型使晶粒及析出相細微化與減少高合金成分金屬巨觀偏析之特性,來探討噴覆成型高強度鋁合金圓錠在擠製的應用上是否有獨特的性質,並評估其相關之應用。 |
英文摘要 | High strength Aluminum alloys have excellect mechanical properties. The purpose of this project is to develop the high strength aluminum alloys by using spray forming process. According the phase diagram, the temperature of solubility of Sc in the Al matrix is about 650℃. It is easy to produce fine precipitates to constrain the coarsening of grains. So, this projet will discuss the characteristics of the modified alloys by using spray forming process to refine the grain and precipitates and reduce the macrosegregation of elements. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。