查詢結果分析
相關文獻
- Degradation of Radioactive Ion-Exchange Resin Using H[feaf]O[feaf]
- 銅及鎘離子對亞鐵離子催化過氧氫分解氯酚類污染物之效應
- 過氧化氫在UV光照射下之裂解行為研究:氯離子及硝酸根離子之影響效應
- 以超音波/過氧化氫法處理石化廢水之可行性研究
- Effects of Oxygen Concentrations and Hydrogen Peroxide on the Removal of 2,4-Dichlorophenol in Sand Columns
- Color Removal of Azo Dye Wastewater by UV/H202 Reactor
- 比較開心手術中補體活化因子C5a及過氧化氫濃度變化及相關性
- 茵陳蒿湯之抗氧化作用的研究
- 印刷級脫墨漿的漂白研究
- 雌二醇及過氧化氫酵素在兔軟骨細胞之交互作用
頁籤選單縮合
題名 | Degradation of Radioactive Ion-Exchange Resin Using H[feaf]O[feaf]=利用過氧化氫進行放射性離子交換樹脂裂解反應 |
---|---|
作者 | 吳和生; 吳騰輝; Wu, Ho-shing; Wu, Teng-hui; |
期刊 | Journal of the Chinese Institute of Chemical Engineers |
出版日期 | 20030300 |
卷期 | 34:2 2003.03[民92.03] |
頁次 | 頁263-274 |
分類號 | 460.02 |
語文 | eng |
關鍵詞 | 過氧化氫; 放射性離子交換樹脂; 裂解; Wet oxidation; Radioactive; Ion exchange resin; Hydrogen peroxide; |
中文摘要 | 本研究結合過氧化氫與鐵(或銅離子)觸媒進行放射性離子交換樹脂氧化裂解反應,此方法可在短時間內將離子交換樹脂完全裂解產生水和二氧化碳,對有機物的減容有很大的幫助,在研究過程分別探討樹脂固體和溶解液體中有機物之裂解動力學,主要變因有鐵(銅)離子濃度,不同離子交換樹脂種類以及過氧化氫的濃度。利用SEM-EDS的觀察結果瞭解Cu[fec7]和Fe[fec7]的裂解反應途徑,在陰離子交換樹脂的氧化裂解中,額外加入醋酸,其功用除了增加反應速率外,亦可抑制氣泡的形成,另本研究也探討連續程序操作的可行性。 |
英文摘要 | The degradation of radioactive ion-exchange resin (IER) achieved by oxidizing it with hydrogen peroxide in an aqueous medium in the presence of iron (or copper) ion as catalyst was investigated. This method could be used to dissolve waste resins completely to form water and carbon dioxide in a short period of time while minimizing the production of form water and carbon dioxide in a short period of time while minmizung, the proouctlon of organic sludge. The reaction kinetics of the solid resin and organic chemicals were obtained to describe the degradation system. The concentrations of metallic catalysts (Cu[fec7] and Fe[fec7]), different kinds of IERs and different concentrations of hydrogen peroxide were used to evaluate the optimum reaction conditions for degradation. The reaction paths of Cu[fec7] and Fe[fec7] were determined using SEM-EDS. It was found that acetic acid coexists with anionic IER in the oxidative-decomposing system, which leads to a high reaction rate and presents the foam from forming. The performance of a fed-batch process was evaluated for industrial applications. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。