頁籤選單縮合
題名 | 利用電腦圖面監控溫室環境及室內搬運模型之研製=Monitoring Control of Environment and Indoor Transportation in Greenhouse Model by Computer Graphic Control |
---|---|
作者 | 艾群; 黃慶祥; 黃裕益; | 書刊名 | 嘉義技術學院學報 |
卷期 | 67 1999.12[民88.12] |
頁次 | 頁27-48 |
分類號 | 435.16 |
關鍵詞 | 自動化; 圖控軟體; 溫室環控; 室內搬運; Automatization; Graphic control software; Greenhouse environmental control; Indoor transport; |
語文 | 中文(Chinese) |
中文摘要 | 本研究目的在製作一自動化溫室模型,包括室內環境監控與自動搬運兩大系統,分別將溫室的環境因子、設備動作轉換成類比數位電氣訊號,經由個人電腦多功能實驗界面卡,將這些電氣訊號傳入電腦,配合圖控軟體發展出溫室自動化模擬教具供教學使用。環境監控使用溫度、濕度、日照度等物理量感測,耐溫室的環境物理量轉為類比的電氣訊號傳入電腦,經圖控軟體設定並控制風扇、加濕器、遮陰網等裝置的驅動與關閉,此決定設備動作的參數直接由圖控軟體設定,同時顯示設定參數、實際環境參數、設備動作情形於電腦螢幕便於人手操作。自動搬運系統使用雙軌臺車,以步進馬達配合近接感測器作位置的控制,植床的搬運採用自製機構,利用鏈條將植床推出取回至搬運臺車,以進行進出盆栽。經試驗測試結果,都能達到預期設定之目標。 |
英文摘要 | The objective of this research is to develop a greenhouse teaching model. This model include greenhouse environmental control and indoor transporting system. the analog signal of environmental sensors and some equipments were converted to the digital signal through PC multi-function interface card. The digital signal transmitted to the computer by interface card and the graphic software developed to control all hardware. The parameters of environment, such as temperature, humidity and sunlight, were measured by sensors and transmitted through interface card to the computer. Then all hardwares were controlled by computer graphic software, such as fan, motor, and all controlled values were showen on the computer monitor. The automatic transporting system used a double-tray car which was controlled by step motor and some switches. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。