查詢結果分析
來源資料
相關文獻
- 水深平均二維明渠變量流有限元素模式之研究
- Three Dimensional Rolling Process Analysis with a Coupled Finite Element Model
- 化學機械研磨製程之有限元素建模
- Comparison of Quasi-Newton Methods for Parameter Identification in Finite-Element Models for Groundwater Contaminant Transport Simulation
- 一般化有限差分模式法計算電纜系統導體的溫度與載流容量
- 利用數值斷面水槽重現二維繫纜浮式結構物與波浪互制之結果
- 潛盾隧道受鄰近工區近接施工影響評估及分析
- 發展化學機械研磨製程之二維原子有限元素模式模擬圓形刀鼻鑽石研磨粒之切削行為
- 化學機械研磨製程空氣背壓對晶圓應力分佈和表面不平坦度的影響研究
- 化學機械研磨製程載具膜背壓分佈的影響研究
頁籤選單縮合
題名 | 水深平均二維明渠變量流有限元素模式之研究=Depth-Averaged Two-Dimensional Finite Element Model for Unsteady Open Channel Flow |
---|---|
作者 | 蔡智恆; 蔡長泰; | 書刊名 | 臺灣水利 |
卷期 | 47:3=187 1999.09[民88.09] |
頁次 | 頁22-33 |
分類號 | 443.6 |
關鍵詞 | 二維明渠變量流; 有限元素模式; 有限差分模式; Two-dimensional unsteady open channal flow; Finite element model; Finite difference model; |
語文 | 中文(Chinese) |
中文摘要 | 本文旨在應用有限元素法,建立一適用於天然河流之水深平均二維變量流水理模 式。利用一組實驗彎道推行數值模擬,驗證模式之模擬能力,演算結果與觀測值頗為一致。 並與已發表過之有限差分模式進行比較,顯示有限元素模式在水面線、縱向流速、橫向流速 等之演算精度上較有限差分模式為佳,流量守恆性也較好。另以濁水溪下游段水工模型試驗 進行模擬,計算結果顯示,有限元素模式非常適合應用於模擬天然河流的變量流歷程。 |
英文摘要 | The present paper is aimed to develop a numerical model based on the Galerkin Finite element method for simulating two-dimensional unsteady open channel flow in alluvial rivers. A set of experimental data on curved channel is used to examine the ability of this model. The numerical results are satisfactory, as clearly observed from comparisons with measured data. Also, this model is compared to the finite-difference model that has been presented. The findings indicate the calculations for water surface, longitudinal velocity and transverse velocity of the finite element model are more satisfactory than those of the finite-difference model. Furthermore, the finite element model has better conservation of discharge. The applicability of the model can be performed by simulating the flood events of the downstream reach of Cho-Shui River. The agreement is good in general. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。