查詢結果分析
來源資料
相關文獻
- 分子動力學模擬結合相液態層析法的分離機制
- 模擬在矽氧表面上聚合物分子於四氯化碳溶劑之吸附現象
- 模擬聚合物分子在氧化鋁表面的吸附現象(Ⅱ)
- 模擬聚合物分子在氧化鋁表面的吸附現象
- 有機溶劑採樣中相對溼度對活性碳吸附管之影響
- Direct Simulation Monte Carlo of Monosilane Low Pressure Chemical Vapor Deposition
- 活性碳纖布浸染銅離子及其對硫化氫吸附研究
- Adhesion and Adsorption of High Energy Wetting Colloids on Low Energy Polymers: Interfacial Thermodynamics versus Electrostatic Interactions
- Adsorption and Desorption of Lysozyme and Albumin to Cibacron Blue 3GA Using Gel Beads and Membrane Discs
- 鈄紋夜蛾(鱗翅目:夜蛾科)核多角體病毒體內量產與防治效果評估
頁籤選單縮合
題名 | 分子動力學模擬結合相液態層析法的分離機制=Molecular Dynamics Simulation of Separation Mechanisms in Bonded Phase Liquid Chromatography |
---|---|
作者 | 程長遠; 巫凱隆; 陳敦禮; 王伯昌; | 書刊名 | 化學 |
卷期 | 57:1 1999.03[民88.03] |
頁次 | 頁25-33 |
分類號 | 460.025 |
關鍵詞 | 分子模擬; 高效能液態層析法; 吸附; Molecular dynamics; Dreiding; HPLC; Adsorption; |
語文 | 中文(Chinese) |
中文摘要 | 本文模擬結合相液態層析法的模型,以DREIDING 2.21為力場,利用分子動力學 的方法, 模擬分析了兩種典型的結合相液態層析過程。 一是計算分析 4-nitrophen、 nitrobenzene、1,4-dinitrobenzene 和 memyl benzoate 四個化合物在 C-8 結合靜相中, 被兩個相同動相極性 methanol/water50:50 和 tetrahydrofuran/water 25:75 比例混合溶 劑下之沖提情形; 二是計算分析 benzyl alcohol、 2-phenoxyethanol、 4-methoxybenzaldehyde 和 methyl phenyl ether 四種化合物在 C-8 與 -CN 兩種不同極 往結合相中,被 acetonitrile/water 40:60 比例混合溶劑下之沖提情形。計算結果與結合 相液態層析實驗結果相互比較,以探討分析混合物在靜相的吸附強度和在動相溶劑吸收強度 交互作用下的分離機制。研究結果發現,此模型對於分析化合物在靜相結合相和動相溶劑的 選擇性上和實驗結果頗為吻合; 另外比較分析化合物在兩相間的計算能量分配情形,可知這 些化合物在沖提管柱中滯留的時間長短。因此,我們模擬的模型應有助於分析者了解和預知 被分析混合物在 HPLC 的滯留行為、沖提順序和分離率。 |
英文摘要 | This work is based on model developed to understand and predict the retention behavior of test mixture in bonded phase liquid chromatography. The procedure employs molecular dynamic techniques to execute the real time simulation on two topic HPLC: (a) a test mixture of4-nitrophen, nitrobenzene, 1,4-dinitrobenzene and methyl benzoate was eluted on C-8 bonded stationary phase by methanoi/water 50:50 and tetrahydrofuran/water 25:75 mobile phase solvents, and (b) atest mixture of benzyl alcohol, 2-phenoxyethanol, 4-methoxybenzaldehyde and methyl phenyl ether was eluted on C-8 and -CN bonded stationary phase by acetonitrile/water 50:50 mobile phase solvent. A set of parameters obtained from the DREIDING 2.21 force field is assigned to each of our models. The interaction may be measured. Our simulation results coincide with experiments on selectivity of mobile phase solvents and retention time of test mixture. The results from this simulation procedure indicate the separation mechanisms of test mixture since the different distribution energy from the adsorption energy on bonded stationary phase surface and the absorption energy in mobile phase solvent. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。