查詢結果分析
來源資料
相關文獻
- 以開放平臺整合CAD資料格式轉換器
- CMM Inspection Planning from CAD Models
- Modeling Ethane Cracker with Application to Flowsheet Simulation of an Ethylene Plant
- 案例式建築設計中案例調適之行為探討
- 電腦輔助設計創造產品全面升級鞏固市垤利基
- 船用俥葉之電腦輔助設計流程
- 語意轉化模式在產品設計上的應用
- 一個WWW-based唯讀記憶體編譯器
- Realization of Product Design Constraints in CAD Modeling
- 淺談板式熱交換器之電腦輔助設計
頁籤選單縮合
題名 | 以開放平臺整合CAD資料格式轉換器=On the Integration of CAD Formats-An Open Platform Approach |
---|---|
作者 | 鄧陳興; 何嘉量; 鄭玉鉅; 范姜世傑; | 書刊名 | 電信研究 |
卷期 | 27:3 1997.06[民86.06] |
頁次 | 頁345-359 |
分類號 | 448.945 |
關鍵詞 | TL資料格式轉換器; 自動測試設備; 電腦輔助設計; 動測試工程; TL CAD format translator; TLCFT; Automatic testing system; ATS; TL computer-aided-design; TLCAD; Automatic testing engineering; ATE; |
語文 | 中文(Chinese) |
中文摘要 | 本文提出一個以共通平臺的架構整合各種不同的CAD資料格式的轉換,以利於印刷 電路板之自動測試。 這共通平臺的架構叫 TLCFT 它是一種 cad.data 之共通格式協定,本 共通格式協定之架構可提供下列五大優點:1. 簡化為特殊之 CAD 資料和式的轉換; 2. 使 由 CAD 佈局到 ATE 測試資料的轉換所需花費的時間, 由 1 個星期的工作天縮短為數秒鐘 內完成;3. 測試工程師僅需要花數分鐘的時間將 cad.data 轉換到開放平臺即可;4. 設計 者可使用任何 CAD 工具來設計,無需考慮與 ATE 機器格式的配合; 5. TLCFT 可使測試工 程師不需改變後處理器之問題。 |
英文摘要 | In this paper, an open platform architecture is proposed to integrate many Computer-Aided-Design (CAD) formats for the Automatic Testing Equipment's (ATE) testing of Printed-Circuit-Boards (PCBs). The poen platform architecture for CAD Format Translator (TLCFT) is a format protocol for CAD.DATA files. The architecture of open plaftorm has achieved the following five characteristics: ● to reduce the need of CAD data format translating for special CAD layout tools; ● to make the data transformation from layout to ATE much easier and more labor-saving from 1 week work to a few seonds; ● a testing engineer only needs to devote the time to translate the CAD.DATA to an open platform; ● a designer can use any type of CAD tools to draw his/her schematics without worrying the format's matching with ATE tools; and ● TLCFT lets testing engineers not necessarily change their post-processor for ever. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。