查詢結果分析
來源資料
相關文獻
- 鈦添加對不銹鋼連鑄薄片組織及拉伸性質之作用
- Mn-Cu-Ni合金球墨鑄鐵的顯微組織與拉伸性質
- Fe-C-Si-Mo系合金延性鑄鐵高溫拉伸性質與耐氧化性之研究
- 模內法接種處理用反應室設計與呋喃樹脂模延性鑄鐵品質關係之研究
- 積層製造Ti-6A1-4V合金之拉伸及疲勞性質
- 高入熱量電渣銲接TMCP結構鋼板機械性質與顯微組織之研究
- 熱處理對高入熱量電渣銲接TMCP結構鋼板機械性質與顯微組織之影響
- 消失模A356鋁合金鑄件之顯微組織分析
- 鋁含量對Zn-XAl-3Cu合金高溫拉伸性質的影響
- Tribological Property and Microstructure of the TiN-Coated Fe-Al-Mn-C Alloys
頁籤選單縮合
題名 | 鈦添加對不銹鋼連鑄薄片組織及拉伸性質之作用=Effects of Ti Addition on the Microstructures and Tensile Properties of Strlip Cast Austenitic Stainless Steels |
---|---|
作者姓名(中文) | 趙宜武; 呂傳盛; 陳立輝; | 書刊名 | 鑄工 |
卷期 | 23:2=93 1997.06[民86.06] |
頁次 | 頁33-41 |
分類號 | 472.3 |
關鍵詞 | 薄片連鑄製程; 沃斯田系不銹鋼; 顯微組織; 拉伸性質; 塑性應變比; Strip casting process; Austenitic stainless steel; Microstructures; Tensile properties; Plastic strain ratio; |
語文 | 中文(Chinese) |
中文摘要 | 以薄片連鑄(Strip Casting)法成形之不�袗�薄片,厚度約1-3mm。其鑄態組織因 受滾輪急速凝固的作用,有大量的樹枝狀晶存在,由於結晶織構呈明顯異方性即使經過冷軋 工程之後,凝固組織效應仍然存在,使得此種薄片之塑性加工性不佳。為定量性理解,以及 尋找凝固組織控制的方法, 本研究以 AISI304 不�袟鶿陞D成分, 微量添加鈦元素 (0.16-0.47wt%Ti) 於不�袗�連鑄薄片中, 探討鈦元素之添加效果,並且與未添加鈦元素之 連鑄薄片,就顯微組織及拉伸性質之差異作比較。觀察各不同添加量薄片之顯微組織,發現 添加鈦具有明顯影響薄片內急冷凝固組織均勻之效果。此外,經固溶或軋延退火後,組織呈 現大量等軸、微細晶粒。拉伸試驗結果顯示,微量添加鈦,可提昇薄片材料之塑性變形能力 ,對深抽抗薄化特性有助益。 |
英文摘要 | This paper deals with correlation of mechanical property and microstructural evolution of strip cast type 304 stainless steels containing 0.0-0.47 wt%Ti. In the ascast state, the equiaxed zone increases with an increase in the addition of small amount of Ti. The role of processing variables, including amount of cold deformation and annealing, was studied relative to the plastic deformation behavior and the deep drawability. The experimental results describing the influence of alloying additive on parameters such as average strain ratio, rm, and planar strain ratio, △ m, were also improved with cold rolled and annealed. The ST-(2) strip, 0.3 wt% Ti microalloyed, demonstrated grain size stability, approx. 6.8 μ m after 30 minuets at 1323K, and tensile deformation behavior superior to the other strips in this study. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。