查詢結果分析
來源資料
相關文獻
- 噴水織機水質對亞克力漿膜膨脹現象之影響
- 亞克力噴水漿料之水膨脹現象
- 壓克力漿料性質之評估
- 透濕防水加工用二液型PU樹脂之合成及性質研究
- 噴水、噴氣與劍桅織機在織物生產上之比較
- 杉木及柳杉單板乙醯化處理效應因子之研究
- 麥飯石探微--兼論膨潤石外形、特徵、及用途
- 四種省產材之微纖維角與其收縮膨潤性質
- Effect of Medium on the Permeation of Drugs Through Polymeric Membranes: Competition between Swelling and Partition
- Permeation of Drugs through Polymeric Membranes with and without Swelling Gradient
頁籤選單縮合
題名 | 噴水織機水質對亞克力漿膜膨脹現象之影響=The Effect of Water Quality on the Swelling Phenomenon of Acrylic Sizes for Water-Jet Looms |
---|---|
作者姓名(中文) | 李仁雄; 魏亞中; | 書刊名 | 紡織中心期刊 |
卷期 | 6:4 1996.07[民85.07] |
頁次 | 頁256-259 |
分類號 | 478.1 |
關鍵詞 | 亞克力漿料; 噴水織機; 酸鹼性; 膨潤; Acrylic size; Water-jet loom; pH; Swelling; |
語文 | 中文(Chinese) |
中文摘要 | 本篇論文研究噴水織機水質對亞克力漿料的安定性影響,發現國內常用噴水織機亞克力漿料形成漿膜後,若未完全烘乾而存在有少許胺鹽吸收水將產生膨脹,水質的酸鹼性與水溫會影響漿膜吸水之形態改變。本文針對不同水溫和水質的酸鹼性,比較漿膜之膨脹現象,並探討其水中的膨潤與收縮。根據實驗結果,建議噴水織機的水質pH 值介於6.5-7.5之間,水溫在20℃以下為佳。 |
英文摘要 | The effects of pH value and temperature on the stability of acrylic size in water were described. The films of water-jet sizes would be swollen in wa-ter if those films were not dried enough and had some ammonia residues. The swelling phenomenon of size films in water at various pH value and at various temperature were observed. Based on the experimental results, the water quality of looms was suggested, which is pH 6.5-7.5 and the tempera-ture is lower than 20°C . |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。