查詢結果分析
來源資料
頁籤選單縮合
| 題 名 | 電腦輔助沖壓件排料規劃 |
|---|---|
| 作 者 | 陳建興; 江世杰; | 書刊名 | 金屬工業 |
| 卷 期 | 29:2 1995.03[民84.03] |
| 頁 次 | 頁51-58 |
| 分類號 | 446.8923 |
| 關鍵詞 | 沖壓件; 排料; 規劃; 電腦輔助; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 本研究主要在開發沖壓件排料軟體。由於目前國內電子、電機和資訊等工業非常發達,使用沖壓件非常多,但因為沖壓件之排料需相 當的經驗及計算胚料之使用率,所以開發一套電腦輔助排料軟體供業界技術人員使用是有必要的。 由於發展沖壓件排料技術,需先具備一套相當完善的CAD軟體,並且要在其架構下很容易建立所需之繪圖程式庫。因此選用在個人 電腦上之輔助繪圖軟體作為本計畫之發展依據。 |
| 英文摘要 | The purpose of this project is to develop a software of nesting for press pieces. Based on the electronic, electrical and informational business etc. In Taiwan being much advanced and the application of press pieces being much broad at present, however, nesting for press pieces being requested to have sufficient experience and to evaluate the use rate of blank, therefore it is necessary to create a set of software in the field of nesting for press pieces for supporting those technician. The technology of developing nesting for press pieces is first required to have a set of very well CAD software in which the graphic library what we need should be established easily under its architecture. Hereby, the aided computer design software on PC is chosen to be the fundamental of this project. |
本系統中英文摘要資訊取自各篇刊載內容。