查詢結果分析
來源資料
頁籤選單縮合
| 題 名 | 鐵鋁錳合金的R曲線破裂韌性研究 |
|---|---|
| 作 者 | 張印本; 李深智; 周序弘; | 書刊名 | 材料科學 |
| 卷 期 | 26:4 1994.12[民83.12] |
| 頁 次 | 頁260-266 |
| 分類號 | 440.39 |
| 關鍵詞 | 鐵鋁錳合金; R曲線; 平面應力; 破裂韌性; Fe-Al-Mn alloy; R-curve; Plane-stress; Fracture toughness; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 本研究以添加11A1、28Mn、0.9C,(A合金)11A1、30Mn、0.8C、2Mo,(B 合金)的鐵鋁錳合金在25℃、-50℃、-100℃以及-150℃四種不同溫度下進行破裂韌 性評估。以X光繞射分析兩種合金之組織形態,根據結果顯示B合金是含有沃斯 田鐵及肥粒鐵的雙相合金,A合金則為單相沃斯田鐵合金。將此二種合金以ASTM E561平面應力R曲線方法求取破裂韌性Kc值;結果顯示Kc值均隨溫度之下降而降 低,且B合金在各溫度之Kc值均高於A合金,在各測試溫度下,B合金之臨界裂縫 長ac值亦高於A合金。 |
| 英文摘要 | This research studied the fracture toughness of the Fe-11AI-28Mn-0.9C (alloy A) and Fe-11AI-30Mn-0.8C-2.0Mo (alloy B) at different temperatures of 25℃, -50℃, -100℃ and -150℃. X-ray diffraction patterns showed that alloy B constitute of ferrite and austenite duplex phases, while alloy A was an austenitic single-phase. The fracture toughness Kc values as measured by R-curve methodplane-stress fracture toughness decreased with decreasing the temperature. Alloy B possessed higher Kcvalue and greater critical crack length (ac) values than alloy A at all testing temperatures. |
本系統中英文摘要資訊取自各篇刊載內容。