查詢結果分析
來源資料
相關文獻
- 應用流線函數法於複合板壓延解析之研究
- Simple Approximate Solutions of Internal Circulation Periods of Liquid in Falling Droplets
- 利用上界限法對複合擠製製程之研究
- 利用微分求積法模擬方形區域內之自然對流
- 利用上界限法對杯-杯形複合擠製之研究
- 應用流線函數法於複合材擠製加工之解析
- Friction and the Upper Bound Method
- Analysis of Asymmetrical Complex Rolling of Multi-Layer Sheets by Upper Bound Method
- Stream Function Solutions for Steady Water Waves
- 利用上界限法估算下料壓力之研究
頁籤選單縮合
題 名 | 應用流線函數法於複合板壓延解析之研究 |
---|---|
作 者 | 黃永茂; 徐宏修; 李弘仁; | 書刊名 | 力學 |
卷 期 | 10:2 1994.06[民83.06] |
頁 次 | 頁119-129 |
分類號 | 446.12 |
關鍵詞 | 三層板壓延; 流線函數; 上界限法; Sandwich sheet rolling; Stream function; Upper bound method; |
語 文 | 中文(Chinese) |
中文摘要 | 本文使用流線函數法及上界限法對三層板壓著壓延提出一套數學模式。藉著本文 所提出之流線函數可自動滿足速度場的邊界條件之特性,本解析模式採用滾輪之圓弧狀邊界 ,並以一連續性速度場來模擬壓延時板材之塑性變形舉動。為了驗証此模式對單層板壓延之 適用性,與 Avitzur 之連續場模式相比較,得到較小之上界限解。 在三層板壓著壓延中, 探討各層板材流動特性及滾輪與板材間之摩擦因子、初始各層板厚比、板厚壓下率、滾徑. 板厚比、變形抵抗比等壓延條件對產品之出口板厚比、壓延功率及壓延負荷等之影響。理論 預測與實驗結果相比較,得到定量上之吻合,由此可知本數學模式可針對複合板壓延製程之 設計提供一有用之參考資料。 |
英文摘要 | Mathematical models for sandwich sheet roling are proposed by stream function and upper bound method. Because the stream functions proposed can automatically satisfy boundary conditions of velocity fields, these models employ circular roll boundary and a continuous velocity field to simulate the plastic deformation behavior of sheet at roll-gap during sheets rolling. To verify the validity of the model used in single sheet rolling, the total powers obtained by this model are compared with those by avitzur continuous model, and it is found that the proposed model has smaller upper bound solutions. During sandwich sheet rolling, effects of the friction factor between the roll and sheet, initial thickness, thickness reduction, ratio of the roll radius to thickness of sheets, flow stress ratio etc., upon the flow patterns of each layer, rolling load, and rolling power are investigated. Theoretical predictions have quantitative agreement with experimental data, therefore the mathematical models can provide useful knowledge in designing the schedule of sandwich sheet rolling. |
本系統中英文摘要資訊取自各篇刊載內容。