查詢結果分析
來源資料
相關文獻
- 被動式光纖迴路系統控制軟體之規劃與設計
- VCS4視訊會議系統控制軟體之設計
- Design and Verification for a Configurable Memory Controller--Memory Interface Socket Soft IP
- 嵌入式系統之軟體設計平臺--即時多工微核心
- A Mixed H[feaf]/H∞ Control Design for Linear Time-Varying System: Dynamic Programming Approach
- 軟體專案管理模式PM-NET之應用研究
- 機器手臂控制理論結合設計之研究
- 影響教學軟體流向控制設計之因素
- DAROTS CMC控制軟體設計
- 微電子系統設計技術趨勢探討
頁籤選單縮合
題名 | 被動式光纖迴路系統控制軟體之規劃與設計 |
---|---|
作者 | 林泄亨; 陳聰謀; 陳振興; 陳光毅; | 書刊名 | 電信研究 |
卷期 | 24:2 1994.04[民83.04] |
頁次 | 頁233-245 |
分類號 | 448.6 |
關鍵詞 | 控制; 被動式光纖廻路系統; 規劃; 設計; 軟體; |
語文 | 中文(Chinese) |
中文摘要 | POSLS 為一數位迴路系統,將傳統的類比銅介質較對線用戶迴路故以數位多工方式的光纖網 路傳送。因此,由交換局至用戶方向,HDT需負責與交換局端的電話介面介接,控制類比音訊數位多工的過程並抽出線路上的信號 (Signaling), 按著透過光纖網路傳送至用戶附近後 , ONU需負責將數位語音解多工並還原成類比音訊後,與用戶端的介面介接,饋還至用戶家。此外,HDT 尚需監督整個光纖系統的傳送狀況,適時發出各種告警訊息,以確保系統能正常運作。 |
英文摘要 | Passive Optical Subscriber Loop System (POSLS) is a loop system which delivers analog voices in a digitized and multiplexed format over an optical fiber network. Therefore, in the direction of central office (CO) to subscribers, the Host Digital Terminal (HDT) has to interface with the voice frequency lines coming out from the switch, control the process of analog-to-digital conversion and multiplexing, and extract the signaling information embedded in the lines. These digitally multiplexed data are delivered to the Optical Network Unit (ONU) over the optical fiber network, and the ONU then performs the digital-to-analog and demultiplexing process, and interfaces with the subscriber lines. In addition, the HDT has to monitor the overall transport system and to signal alarms to make sure it is well-operated. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。