查詢結果分析
相關文獻
- 各種流速公式對集流時間及設計降雨強度計算之影響
- 從海難事件的發生論船員與船舶間互動效能的提昇
- 安全的設計CAE的挑戰
- Designing Lower Dimensional Arrays for Uniform Dependence Algorithms with Convex Index Sets
- 離心式污水泵浦之設計開發
- 利用計算機輔助之爆炸成形彈頭設計
- 智慧拼圖之求解及其應用於智力測驗之研究
- Design of Digital Control Subject to a Slow Computer
- 鰭片式熱交換器之設計計算與測試分析基礎(上)
- 三相鼠籠型感應電動機之計算機輔助設計﹣單層繞組
頁籤選單縮合
| 題 名 | 各種流速公式對集流時間及設計降雨強度計算之影響 |
|---|---|
| 作 者 | 黃宏斌; | 書刊名 | 農業工程學報 |
| 卷 期 | 36:4 1990.12[民79.12] |
| 頁 次 | 頁13-23 |
| 分類號 | 443.1 |
| 關鍵詞 | 流速公式; 計算; 降雨強度; 設計; 集流時間; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 為探求不同流速公式之使用對集流時間或降雨強度之影響,本文先比較培真公式、庫特公式與曼寧公式間之參數關係。接著,再以瑞哈公式、克比齊公式、加州公式、克雷恩公式與曼寧公式比較所估算之降雨強度值之差異。結果顯示,當水力半徑小於2.0m時,庫特公式之粗糙參數與曼寧公式者較為一致。另外,於小水力半徑(R<0.02m)時,曼寧公式之粗糙參數有偏大現象。當河道長度為1000m,水力半徑為0.1m,計算臺北地區10年一次之平圾附雨強度時,瑞哈公式、克雷恩公式與克比齊公式分別在曼寧粗糙係數n=0.013,0.02與0.033之某特定坡度範圍內與曼寧公式之計算值有頗為脗合之現象。 |
| 英文摘要 | In order to study affection of usage of various velocity equations to calculating concentration time and rainfall intensity, this study, first of all, compared the parameter relationships between Bazin, Kutter as well as Manning equations, and, the, the discrepancies of rainfall intensity calculated by Rziha, Kirpich, California, Kraven and Manning equations. The results show that the roughness parameter of Kutter has a good match with Manning one when hydraulic radius is smaller than 2.0m. Moreover, Mannilng equation has an overestimated values of roughness parameter as hydraulic radius is smaller than 0.02 m. In case of calculating the average rainfall intensity of Taipei area with 10 years recurrence interval at section of 1000 m of river length and 0.1 m of hydraulic radius, Rziha, Kraven and Kirpich equations, respectively, have a phenomenon of good match with Manning one in some special range of slope when Manning’s roughness coefficient is equal to 0.013, 0.02 and 0.033. |
本系統中英文摘要資訊取自各篇刊載內容。