查詢結果分析
來源資料
相關文獻
- 紊流強度與尺度及矩柱斷面對渦散的影響
- 紊流對二維矩柱分離剪力層發展之影響
- 不同被覆H型鋼樑與樓板組合構件模式下之防火時效
- Vortex Shedding from Fixed and Oscillating Rectangular Prisms in Shear Flows
- The Effects of Turbulence on Mean Flow Past Fixed and Oscillating Rectangular Prisms
- 以小尺度鋼板進行被覆材料耐火時效評估
- 直提式閘門振動分析評估之研究
- 方柱體於剪力流場中之流場特性研究
- 斷面尺度因子對被覆H型鋼樑耐火性能之影響
- 亂流強度與尺度對二維方柱尾流渦散發展之影響
頁籤選單縮合
題 名 | 紊流強度與尺度及矩柱斷面對渦散的影響 |
---|---|
作 者 | 盧博堅; 雷泰雄; 鄭啟明; | 書刊名 | 力學 |
卷 期 | 9:3 1993.09[民82.09] |
頁 次 | 頁219-229 |
分類號 | 440.137 |
關鍵詞 | 尺度; 矩柱; 紊流強度; 渦散; 斷面; 紊流長度尺度; 渦散; Turbulence intensity; Turbulence length scale; Vortes shedding; |
語 文 | 中文(Chinese) |
中文摘要 | 本文以風洞實驗方法探討在均勻紊流場中,流經二維矩形柱之渦散現象受逼近流 場之紊流強度,紊流長度尺度,以及模型斷面長寬比等參數之影響。本實驗是以兩根熱膜探 針置於柱體背後的順風向(X),橫風向(Y),及軸向(Z)的佈點上量測其尾流速度場 。從量測點,求得平均速度,擾動速度之均方值,頻譜,時間相關函數和頻率相關函數,以 探討在上述的控制參數下對尾流渦散的影響。 |
英文摘要 | This paper is an experimental investigation of the development of the vortex shedding behind a 2-D rectangular cylinder in homogeneous turbulent flows with different variation of turbulence intensity, turbulence length scale, and cross-section of the cylinder. measurements of the velocity in the wake of the cylinder were performed at points in alongwind direction (X), acrosswind direction (Y), and spanwise direction (Z) behind the rectangular cylinder using two hot film probes. The data were analyzed for the calculation of the mean velocity, r.m.s. velocity fluctuation, time cross-correlation, spectrum, and coherence. The results were used to evaluate the effects of the above parameters on the development of the vortex shedding. |
本系統中英文摘要資訊取自各篇刊載內容。