查詢結果分析
來源資料
相關文獻
- 亂流強度與尺度對二維方柱尾流渦散發展之影響
- 鋁合金管接頭低速充填壓鑄製程開發研究
- 車流亂流量測及其特性分析
- 談晴空亂流
- 綠島聯外海空運輸改善之研究
- Can Copepods Differentiate Prey from Predator Hydromechanically?
- On the 2D and 3D Simulations of Turbulent Flow Around a Square Prism with Different Impacting Angles
- 斜張橋受風載重之顫振及亂流效應分析
- 大跨度橋梁考慮振態模式耦合之顫振及亂流效應分析
- 沿斜壁流動之冪律薄膜亂流邊界層之研究
頁籤選單縮合
題名 | 亂流強度與尺度對二維方柱尾流渦散發展之影響 |
---|---|
作 者 | 盧博堅; 鄭啟明; 盧永山; | 書刊名 | 力學 |
卷期 | 7:2 1991.06[民80.06] |
頁次 | 頁121-128 |
分類號 | 440.137 |
關鍵詞 | 二維方柱; 尾流渦散; 亂流; |
語文 | 中文(Chinese) |
中文摘要 | 本文探討逼進亂流場中,亂流強度(u'/U)與亂流長度尺度(Lx/D)對二維方柱 尾流渦散發展之影響。實驗所需之亂流強度( 1 %∼ 18 %)與亂流尺度( 0.88 ∼ 4.42 ),係使用不同尺寸之柵板,配合不同模型斷面所達成。 實驗風速之對應雷諾數為 2.7 × 10 �捸C 本實驗以方柱體側風面前緣之壓力孔,量取其表面之擾動壓力。同時以方柱體後並 列之兩根熱膜探針, 量取其尾流速度場。 從量測點求得之頻譜( powerspectral density )和頻相關( coherence )中顯示出二維方柱尾流的發展主要是受逼進流場之亂流強度與 尺度的影響。亂流強度增加,消弱渦漩結構並使渦漩形成區在更下游處形成;亂流尺度對渦 漩結構有消弱之作用,但渦漩形成區並無移動之現象產生。 |
英文摘要 | This paper is devoted to the study of the development of the vortex shedding behind a square cylinder placed in homogenous turbulent flows with different intensities (u'/U:1%-18%) and length scales (Lx/D:0.88-4.42). The Reynolds number corresponding to the mean approaching velocity and the width of the cylinder was 2.7 × 10 ��. The pressure fluctuations located on the lateral side near the sharp front edge of the cylinder were measured through a pressure tap. The velocity fluctuations were simultaneously detected by a pair of side by side hot film probes in the wake of the cylinder. The power spectral density and coherence of the pressure and velocity fluctuations revealed that the development of the vortex shedding of the square cylinder was mostly affected by the turbulence intensity and length scale of the approaching flow. When the turbulence intensity increases, the strength of the vortex is reduced and the formation of the vortex occurs further downstream. The turbulence scales also reduces the vortex strength. However, the location of the formation of the vortex remains unchange. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。