查詢結果分析
來源資料
頁籤選單縮合
題名 | 無塵室空調場所裝置熱管式熱交換器之省能研究 |
---|---|
作者姓名(中文) | 許守平; | 書刊名 | 勤益學報 |
卷期 | 10 1992.11[民81.11] |
頁次 | 頁19-37 |
分類號 | 446.6425 |
關鍵詞 | 空調; 場所; 無塵室; 裝置; 熱交換器; 熱管式; |
語文 | 中文(Chinese) |
英文摘要 | The Study of equip the clean room With Heat pipe Heat Exchanger for Saving energyAbstract The ordinary fin tubes are used but every two copper pipes are Formed a set and a Ushape.After vacuuming and stuffed with liquid R-ll to one-thirds of the innervolume of theevaporating part,the simple closes two-phase thermo-syphon heat-absorbing tube can bemanufactured. First,equip the clean room with heat pipe heat exchanger at the top of the releasingapparatus of the air conditioning place.Then evaporating side contacts with the highly heatedair in the inner manufacturing apparatus.Affter that,by enforced convection,the liquidrefrigerant in the evaporating part absorbs and evaporating heat.Finally,lead outer airdirectly in via the condensing side of the heat pipe to exchange hot air and evacuate its innerheat simultaneously. Practically,the following purposes can be achived if heat pipe heat exchanger is equippedwith: (1)lt can reduce the outer and inner temperature of the manufacturing apparatus and prevent the inner machinery from damage. (2)lt can decrease the cooling loads of air conditioning. (3)0uter air can be directly lead in to do heat-exchange without polluting the clean room.In addition,the expense of furnishing HEPA and the electricity of operating ventilating fan be saved. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。