查詢結果分析
來源資料
相關文獻
- 以含氟化物之磷酸鹽封孔處理對鎂鋁合金AZ31B微弧層耐蝕性研究
- 利用微弧氧化表面改質直接生成氫氧基磷灰石於牙科植體鈦金屬表面之評估
- 以微弧氧化提升鈦合金表面陶瓷膜之耐蝕性
- 電解液中添加粒子對微弧氧化陶瓷膜之影響
- 鋁合金微弧氧化陶瓷膜層性質之研究
- AZ61鎂合金經微弧氧化處理的生物可降解之研究
- 臺灣荷蘭乳牛不良遺傳基因頻率探討
- Factors Influencing Knowledge of and Attitude toward Fluoride in Taiwan
- 氮含量與熱處理後之α相析出量對2205雙相不銹鋼耐蝕性質之影響
- 藍瑞斯、約克夏、杜洛克和盤克夏豬種之GPI和PGD連鎖基因頻率估測值
頁籤選單縮合
| 題 名 | 以含氟化物之磷酸鹽封孔處理對鎂鋁合金AZ31B微弧層耐蝕性研究=Corrosion Prevention for MAO-coated AZ31B by Phosphate-based Sealing Treatment with Added Fluoride |
|---|---|
| 作 者 | 李佳諭; 鄭安佑; 簡順億; 葛明德; | 書刊名 | 防蝕工程 |
| 卷 期 | 37:3 2023.09[民112.09] |
| 頁 次 | 頁15-25 |
| 分類號 | 440.25 |
| 關鍵詞 | 鎂鋁合金; 微弧氧化; 氟化物; 磷酸鹽; 封孔處理; 耐蝕性; AZ31B; Magnesium aluminum alloy; Micro-arc oxidation; Fluoride; Phosphate; Sealing treatment; Corrosion resistance; |
| 語 文 | 中文(Chinese) |
| DOI | 10.6376/JCCE.202309_37(3).0002 |
| 中文摘要 | 鎂合金在輕金屬中具有多項優點,其良好散熱性及比剛性,同時具生物相容性及可回收性,應用領 域廣泛亦兼顧環保訴求,但其活性大易腐蝕,須進行表面處理技術提升耐蝕性及應用性。 本研究以微弧氧化製程,使鎂鋁合金生成高抗蝕氧化層,但在微弧擊穿過程中的急劇冷卻和氣體的 釋放,造成微孔隙和微裂紋等些許缺陷,使腐蝕介質從局部缺陷滲透至底材而導致腐蝕。為了提升微弧 層耐蝕性,本實驗將微弧層進行含氟化物與磷酸鹽封孔處理,使表面生成對鎂合金具保護力的 NaMgF3 立方顆粒。由表面形貌得知,磷酸鹽可使氟化鎂鈉立方顆粒變小及數量增加,提升顆粒覆蓋率於微弧層 表面,搭配電化學量測及鹽霧試驗,證實此製程可提升鎂鋁合金微弧氧化層之耐蝕性。 |
| 英文摘要 | Magnesium alloy has many advantages among light metals. The material exhibits excellent thermal conductivity and high stiffness-to-weight ratio, is compatible with biological systems and can be recycled. It has many potential uses and prioritizes environmental sustainability. Nevertheless, it exhibits a high susceptibility to corrosion, requiring advancements in surface treatment. In this study, a micro-arc oxidation (MAO) process was used to form a highly corrosion-resistant oxide layer on magnesium-aluminum alloys. Despite this, the rapid cooling of temperature and the subsequent release of gas during the micro-arc breakdown process resulted in the formation of certain defects, such as micropores and microcracks. These defects led to the concentration of the corrosive medium in localized areas. Defects penetrate into the substrate and cause corrosion. In order to improve the corrosion resistance of the micro-arc layer, the micro-arc layer was subjected to phosphate sealing treatment with fluorine-containing compounds to generate NaMgF3 cubic particles on the surface that are protective for magnesium alloys. In this experiment, it is known from the surface morphology that phosphate can make the cubic particles of sodium magnesium fluoride smaller and larger, thereby increasing the particle coverage rate on the surface of the micro-arc layer. Through the use of electrochemical measurement and salt spray tests, it has been shown that this treatment effectively enhances the corrosion resistance of the micro-arc layer in magnesium-aluminum alloys. |
本系統中英文摘要資訊取自各篇刊載內容。