查詢結果分析
相關文獻
- 手勢操作六軸機械手臂即時運動系統
- 用於實驗階段之兩足機器人定位電路設計與實現
- 採摘柑橘果實機器手臂之研製
- 撞球機械手臂之研製
- 漫談機器手臂應用技巧
- 漫談以機器手臂為主架構之自動化系統
- Real-time Trajectory Planning for Robot Menipulators a Spherical Modeling Approach Integrating Neural Netowrks and Artificial Potential Fields
- 3D雷射視覺應用於汽車工業機器手臂之電弧銲接
- 機器手臂應用在番茄大小選別過程中搬移作業之研究
- 三維機器手臂避碰路徑規畫之電腦輔助設計與模擬
頁籤選單縮合
題名 | 手勢操作六軸機械手臂即時運動系統=Hand Motion System for Real-Time Manipulating 6-Axis Robot Arm |
---|---|
作者 | 林其禹; 張書菡; 梁中彝; | 書刊名 | 科儀新知 |
卷期 | 205 2015.12[民104.12] |
頁次 | 頁33-43 |
專輯 | 智慧機器人專題 |
分類號 | 448.944 |
關鍵詞 | 機器手臂; 手勢辨識操作系統; 六軸加速度感測器; |
語文 | 中文(Chinese) |
中文摘要 | 本文透過Kinect擷取手套特徵物件的3D位移資訊,以及使用LPMS-B六軸加速度感測器即時感測手腕當前三軸角度姿態,整合成終端效果器六軸資訊,對機器手臂執行遠端操作。其中手套的設計結合Arduino的開關控制,遠端控制機器手臂終端效果器上裝設的機器夾爪開闔(抓取或放置物件),發展出一套不必事先教導,可供人類藉著移動自己的手掌來直接指揮六軸機器手臂執行六軸同動運動,完成對隨意物件所需的操作。此技術適合應用在隨機使用機械手臂執行物件操作的場合,以直覺手勢直接引導的操作方式,免除示教過程,創造時間節約、使用效率和競爭力,提高智慧自動化水平。相同技術也可用在創造難以教導或需長時間才能完成的機器手臂困難運動軌跡,再重複實施在機器手臂後續的物件操作上。這對需要複雜軌跡才能完成的物件組裝而言具高度應用價值。 |
英文摘要 | In this paper, 3D displacement information of the featured glove is captured by Kinect and the Euler's angles of the operator's wrist are postured by LPMS-B 6-axis acceleration sensor (from L-P Research) immediately. After that, the 3D displacement information is integrated with Euler's angles into the integral 6-axis information for defining the real-time end-effector position and posture in the robot arm tele-operation. Furthermore, the featured glove was equipped with an Arduino circuit for controlling the on-off operation (grasping or releasing object) of the gripper on the end-effector. This innovative system can be used to control the 6-axis robot arm to operate a randomly positioned object without pre-teaching. This technique is particularly suitable for operating randomly-positioned objects by using multi-axis robot arm. The operation is intuitive, without the time-consuming teaching process, save time, and increase efficiency. The new system can also be used in generating trajectories for some hard-to-teach or high time-consuming object operations. The trajectory produced by the hand posture operation can be subsequently used on repeated object operations. This is a valuable tool for some hard-to-teach assembly tasks. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。