查詢結果分析
相關文獻
- 秈米糕類蒸製過程的熱傳研究
- 加工方法對糙米及黃豆製品鐵質生體可利用率之影響
- 蒸煮及鹽酒的添加對魚肉脂肪酸組成及脂質安定性之影響
- 蒸煮溫度與時間對麻竹材色與表面性質之影響
- 間隙蒸煮過程優化(3)--優化與回歸
- 雞肉蒸煮火腿製造改進之研究(2):雞胸肉比例、食鹽、三聚磷酸鈉及冰水添加量對淘汰蛋雞肉蒸煮火腿官能品質及理化性狀之影響
- 雞肉蒸煮火腿製造改進之研究(3):酸、鹼處理對淘汰蛋雞腿肉品質之影響
- 雞肉蒸煮火腿製造改進之研究(4):機械嫩化及添加填充劑與黏著劑對經酸鹼處理之淘汰蛋雞腿肉製造蒸煮火腿品質之影響
- Experimental Investigation of Liquid R-134A and Water Forced Convection Heat Transfer in Small Circular Tubes
- 食品在擠壓蒸煮加工中的流變性質
頁籤選單縮合
題名 | 秈米糕類蒸製過程的熱傳研究=Heat Transfer in Steaming of Non Gluten Rice Cake |
---|---|
作者 | 黃世榮; 李允中; 吳尚澤; 許政裕; | 書刊名 | 農業機械學刊 |
卷期 | 20:3 2011.09[民100.09] |
頁次 | 頁73-81 |
分類號 | 473.25 |
關鍵詞 | 蒸煮; 對流熱傳係數; 澱粉糊化; Steaming process; Convection heat transfer coefficient; Gelatinization; |
語文 | 中文(Chinese) |
中文摘要 | 「蒸」是亞洲常見的烹飪方法之一,在西方並不常見,而在食品工業上,常利用蒸汽凝結成的水滴或水膜並釋出蒸發潛熱,食物表面接觸到高溫的蒸汽並凝結的情況下,其表面對流熱傳係數高達數千W/m^2K,讓表面溫度快速提昇並迅速傳熱至各部位,然而回顧文獻,蒸煮的熱質傳研究仍相當少。本研究之目的針對日常生活中常用於蒸煮的電鍋,經實驗並使用整體模式法推估其表面對流熱傳係數,接著代入米糕類蒸製過程中的熱質傳模型並與實驗比較。實驗裡以DSC熱量分析儀去量測米糕與米漿的比熱與糊化熱,並利用線熱源法自製熱傳導係數探針去量測熱傳導係數,再由有限元素軟體COMSOL Multiphysics模擬驗證米糕蒸煮升溫過程。由預備蒸煮實驗結果可知水分傳遞對於蘿蔔糕的熱傳影響很小,故此研究之統御方程式使用單純熱傳導方程式並考慮糊化熱的影響。此外整體模式法求得的表面對流熱傳係數僅只有文獻上純蒸汽的一半,顯示蒸汽品質對於對流熱傳係數的影響很大。而模擬米糕與米漿蒸煮方面,蒸煮秈米糕實驗與模擬升溫數據之間的誤差為5.8%,而模擬蒸煮秈米漿時考慮糊化溫度範圍內秈米漿比熱的上升作為模擬糊化焓值,其誤差僅為7.4%,因此本研究的模擬數據相對於實驗能有正確的再現性,而其模擬之變化參數可做為現有蒸煮過程作品質控管的改善依據。 |
英文摘要 | Steaming is commonly used as a heating medium in preparing Chinese cuisine, but studies on heat transfer in steaming of food is very scarcely to be found in literatures. In this study, mathematical models for predicting the temperature history of radish cakes and rice flours dough during steaming in a rice cooker were developed, and simulated in finite element software (COMSOL Multiphysics) using the surface heat transfer coefficient evaluated by lumped- mass method. Thermal conductivity was measured by heat line source method and specific heat was obtained from differential scanning calorimetry (DSC). Based on the experimental results for the steam reheating of radish cakes, the pure conductive model with reaction heat was presumed to be the governing model. Besides, the estimated surface heat transfer coefficient was only half of that from the literatures which indicated that quality of steam has significant effects on the coefficient. In the simulation of rice flours solution, varied specific heat referred to DSC result was modified in COMSOL Multiphysics calculation. The model was successfully constructed with an average errors 7.4 % between the experiment and simulation by considering the gelatinization enthalpy. Also, the average errors between simulation and experiment for non gluten rice cake steaming were about 5.8%. The implications of these models may be useful for understanding heat and mass transfer model of steaming of food and then set up a good quality assessment. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。