查詢結果分析
來源資料
相關文獻
- 多晶片COB封裝之高功率LED的散熱分析
- 吸濕排汗諮詢系統之設計
- The Study of Pulsed Au-Plating Deposited Heat Spreader for Semiconductor Lasers
- Steady State Temperature Prediction of Packaged Devices Using A Transient R-C Mehtod
- 如何正確評估散熱片之散熱能力
- 冷卻水流速及熱阻薄膜對熱鍛後後擠沖頭溫度之影響
- 晶片尺寸封裝元件熱傳性能的量測與模擬之比較
- 電子構裝熱阻量測技術
- The Experimental Investigation of Thermal Resistance for Various Heat Dissipation in CPU Heat Sink
- IC構裝之散熱對策
頁籤選單縮合
| 題 名 | 多晶片COB封裝之高功率LED的散熱分析=Heat Dissipation Analysis of High Power Multi-Chip COB Package LEDs |
|---|---|
| 作 者 | 吳學翰; 林寬泓; 林舜天; | 書刊名 | 技術學刊 |
| 卷 期 | 27:2 2012.06[民101.06] |
| 頁 次 | 頁73-80 |
| 分類號 | 448.57 |
| 關鍵詞 | 晶片溫度; 熱阻; COB封裝; 紅外線熱顯像儀; Chip temperature; Thermal resistance; Chip on board package; IR camera; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 本研究比較五種不同晶片間距之「多晶片 (chip on board, COB) 封裝之高功率 LED元件」的晶片溫度 (chip temperature, Tchip) 及熱阻 (thermal resistance, Rth),以評估 LED的散熱效能。實驗除了以紅外線熱顯像儀實際測量晶片溫度,並使用計算流體力學軟體 (computational fluid dynamics, CFD) 進行模擬比對。此外也探討不同材質散熱基板、不同散熱鰭片厚度以及不同晶片尺寸對於 COB封裝高功率 LED元件晶片溫度的影響。結果顯示消耗功率為 9.92 W (350 mA) 時,A、B、C、D及 E Type試片的晶片溫度分別是 84.32°C、82.87°C、81.91°C、81.36°C與 81.20°C,晶片間距最小的 A Type與最大的 E Type,兩者的晶片溫度相差 3.12°C,顯示晶片間距較小者具有較高的晶片溫度以及熱阻,當 GaN-base晶片的間距從 0.5 mm增加至 2.0 mm時,可以有效地將晶片產生的熱能傳導出來。 |
| 英文摘要 | Five different chip gaps of multi-chip COB (chip on board) packages of high power LED components were compared chip temperature and thermal resistance to evaluate the thermal performance of LEDs in this study. The junction temperature was measured not only by using an IR camera but also the Computational Fluid Dynamics (CFD) simulation software for comparison. Furthermore, the effects of different heat slugs, the thickness of heat sinks and chip size on the junction temperature of high power LED components were discussed. Experimental results show that for power consumption of 9.92 W (350 mA) the chip temperature of A, B, C, D and E-Type structure was 84.32°C, 82.87°C, 81.91°C, 81.36°C and 81.20°C, respectively. The chip temperature difference between the A-Type and E-Type structure was 3.12°C. Thus, a chip with a smaller gap a higher chip temperature and more thermal resistance. The gap of a GaN-base chip increased from 0.5 mm to 2.0 mm, resulting in an efficient increase in heat dissipation. |
本系統中英文摘要資訊取自各篇刊載內容。