查詢結果分析
相關文獻
- 合金元素Cr及V對於片狀石墨鑄鐵機械性質與金相顯微組織的影響
- 高溫與熱處理對鉻鉬釩鋼機械性質之影響
- 合金元素Cu、Sn對於片狀石墨鑄鐵微觀組織與機械性質之影響
- 釩、鉻對鑄造SKD-61熱作工具鋼特性影響之研究
- 鉻及釩增補劑對運動表現之影響
- 中鋼低碳含Cr、B、V合金鋼抽線球化料之品質改善
- Chromium, Vanadium and Molybdenum Effects on C57BL/6J-OB Mice and Lean Littermates
- 高鉻鑄鐵(20%鉻,2.6%碳)添加矽、鉬、釩、鎢對鑄造狀態組織發展的影響
- 鉻對碳錳鋼銲接金屬之機械性質及微觀組織之影響
- Effect of Chromium and Vanadate Supplementation on Obese and Lean Mice
頁籤選單縮合
題 名 | 合金元素Cr及V對於片狀石墨鑄鐵機械性質與金相顯微組織的影響=Effect of Alloying Element Vanadium and Chromium on Mechanical Properties and Microstructure of the Flake Graphite Cast Iron |
---|---|
作 者 | 楊榮顯; 王亞彰; | 書刊名 | 鑄造工程學刊 |
卷 期 | 38:1=152 2012.03[民101.03] |
頁 次 | 頁10-20 |
分類號 | 472.2 |
關鍵詞 | 鉻; 釩; 片狀石墨鑄鐵; 機械性質; 金相顯微組織; Chromium; Vanadium; Flake graphite cast iron; Mechanical property; Metallographic microstructure; |
語 文 | 中文(Chinese) |
中文摘要 | 隨著環境汙染日益的嚴重,環境保護的重要性已是刻不容緩。鑄鐵中經常添加之合金元素鉻(Cr),已被美國EPA列為B級致癌物,因此尋找可替代之合金元素,應是在環境保護之貢獻上可努力的方向之一。本研究是以與鉻(Cr)具有相近功能之合金元素釩(V)為標的,來探討分別添加釩(V) (0.02~0.5wt%)與鉻(Cr) (0.2~1.0wt%)對於片狀石墨鑄鐵之機械性質與金相顯微組織(基地組織、石墨之型態與大小等)的影響,並評估其影響之同質性與差異性。實驗結果顯示隨著合金元素鉻(Cr)添加量之增加其抗拉強度會有逐漸增強的趨勢,但是當添加量大於0.5 wt%以後,抗拉強度則會有明顯減少的趨勢;觀察金相顯微組織發現,隨著合金元素鉻(Cr)添加量的增加,石墨數量會有明顯減少的趨勢,當鉻(Cr)添加量大於0.5wt%時,在基地組織裡會有白鑄鐵組織出現,並隨著鉻(Cr)添加量之再次增加而明顯增加。合金元素釩(V)添之效果,隨著添加量的增加,石墨數量有明顯減少及微細化之趨勢。 |
英文摘要 | Due to the increasing of environmental pollution, it is imperative to highly respect the importance of environmental protection. The alloying element chromium (Cr), which is often added to cast iron, is regarded as Class B carcinogen by U.S. EPA. Thus, it deserves attention to make more efforts on looking for substitutive alloying elements so as to make contribution on environmental protection.The objective of this research is to adopt the alloying element vanadium (V), which has the similar properties with chromium (Cr), as the substitutive target. The effects of alloying element vanadium (V) (0.02~0.5wt%) and chromium (Cr) (0.2~1.0wt%) on the mechanical properties and metallographic microstructures (matrix structure, morphology, size of graphite, etc.) of the flake graphite cast iron are investigated. The homogeneity and differences of these two alloying elements are also evaluated in this research.Experimental result shows that with the increasing of the alloying element chromium (Cr), the tensile strength will increase gradually at beginning. However, as the addition amount of the alloying elements chromium (Cr) is over 0.5 wt%, the tensile strength will decrease remarkably. Metallographic microstructures show that with the increasing of the alloying elements chromium (Cr), the amount of graphite will significantly reduce. As chromium (Cr) is over 0.5 wt%, the white cast iron structure will appear on the matrix, and which increases with the increasing of the chromium (Cr). The amount of graphite will be reduced and minute significantly by increasing the alloying element vanadium (V). |
本系統中英文摘要資訊取自各篇刊載內容。