查詢結果分析
來源資料
相關文獻
- V型槽聚光型太陽光電發電系統設計
- MOS-電阻陣列紅外線影像產生器系統設計
- The Apllication of V-Groove Solt-Array Method to the Piezoresistive Pressure Sensors
- 太陽能電池模組部分遮蔽對最大功率追蹤器追蹤性能之影響
- 超低溫工作之MOS-微電阻之設計
- 紅外線MOS-微電阻量測技術與特性分析
- 應用於太陽能照明之智慧型複合電池充電控制器設計與研製
- 表面電漿子在太陽能電池之光電效應
- 數位式太陽能充電器之研製
- Establishment and Study of a Photovoltaic System with the MPPT Function
頁籤選單縮合
題名 | V型槽聚光型太陽光電發電系統設計=Design of a V-Trough Concentration Photovoltaic Generation System |
---|---|
作者姓名(中文) | 蘇義傑; 蔡渙良; | 書刊名 | 科學與工程技術期刊 |
卷期 | 6:3 2010.09[民99.09] |
頁次 | 頁29-39 |
分類號 | 448.167 |
關鍵詞 | 太陽能電池模組; V型槽; Simulink; Photovoltaic module; PV module; V-trough; |
語文 | 中文(Chinese) |
中文摘要 | 本文提出V 型槽聚光型太陽光電發電系統設計,首先建立的模擬模型是由通用型太陽能電 池模組和V 型槽完成,使用Simulink 套裝軟體,模擬商用的太陽能電池、模組、陣列加裝V 型槽聚光板模型,並且能夠輕易的在模擬平台上使用。本文提出的模型設計一套使用者友善的 圖形遮罩介面和操作容易的使用者對話框,像是使用Simulink 圖形資料庫一樣方便。這使得聚 光型太陽能電池模組容易被模擬,並且分析日照強度對太陽能電池溫度和輸出特性的影響。經 由設計加裝一組鏡面不銹鋼反射板的太陽光電模組在實際工作環境進行實驗量測,可以相互驗 證V 型槽聚光型太陽光電發電系統設計理論分析與實驗量測的吻合性。 |
英文摘要 | This report presents the design and validation for a V-trough concentration photovoltaic (PV) module. First, a model built from a generalized photovoltaic module and V-trough is implemented by using Simulink software. This generalized model can represent a PV cell, module, and array. The proposed model is also designed with a user-friendly icon and a dialog box such as those in Simulink block libraries, thereby making a concentrated V-trough PV model easy to simulate and analyze. When the impact of sunlight intensity on the temperature of a solar cell is considered, the characteristics of the output power and current of such a model can be simulated by using our proposed design. Finally, through experimental measurements, this model is validated by a V-trough with stainless steel reflectors and a commercial PV module. The results indicate that the concentration effects of the measured data on the V-trough PV module approximately agree with the predicted ones. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。