查詢結果分析
來源資料
相關文獻
- 無鉛環保銲料鋼板印刷製程參數優化
- 表面黏著技術鋼板印刷技術
- A Knowledge-based System for Stencil Printing Process Planning and Control
- Bayesian Estimation for the Optimum in Single Factor Quadratic Regression
- 以肉雞生長模擬模式探討飼糧組成與經濟反應之關係
- 以反應曲面法探討殺菁條件對胡蘿蔔泥品質之影響
- 利用反應曲面法探討黃麴毒素B[feb5]之熱破壞性
- 經β-環狀糊精處理之減膽固醇蛋黃粉的理化性質
- 應用灰色GM(1,N)模型及田口實驗法於塑膠射出成型加工上之研究
- 利用反應曲面法探討Curdlan及糯玉米澱粉的添加對嫩豆腐冷凍乾燥適性之影響
頁籤選單縮合
題名 | 無鉛環保銲料鋼板印刷製程參數優化=The Optimization of Stencil Printing Process for Lead Free Materials |
---|---|
作者 | 黃乾怡; 應國卿; 蔡欣倫; | 書刊名 | 技術學刊 |
卷期 | 21:3 民95.09 |
頁次 | 頁227-235 |
分類號 | 440.3 |
關鍵詞 | 表面黏著技術; 無鉛錫膏; 鋼板印刷; 田口實驗設計; 反應曲面; Surface mount technology; Solder paste; Stencil printing; Taguchi method; Response surface method; |
語文 | 中文(Chinese) |
中文摘要 | 歐盟於2002 年10 月通過RoHS 指令,2006 年07 月01 日起電子產品全面禁用含“鉛”物質。為確保產業競爭力,業者必須謹慎規劃其製程與選擇合適的物料,以提昇產品良率與可靠度。相關研究指出約莫60%焊接缺點源自於不當錫膏印刷製程控制,本研究運用田口方法針對錫銀銅305 銲料進行鋼板印刷實驗。並透過適合度檢定實驗數據是否呈常態分佈。運用信號雜音比與變異數分析,決定影響製程良率之顯著因子。再以驗証實驗判斷最佳製程參數水準組合之再現性。此外,應用反應曲面分析,瞭解各製程參數對印錫厚度的影響,作為日後製程參數調整之參考依據。最後提供,無鉛產品於鋼板印刷製程之最佳參數水準組合。 |
英文摘要 | The soldering materials used in the electronics industry are mainly for the assembly of components onto the substrates and/or Printed Circuit Boards (PCBs).The eutectic tin lead solder (63Sn/37Pb)is commonly used due to its low cost and superior material properties. However, due to the harmful influence of lead to human health, the European Union has regulations to restrain the use of lead material by July 2006. This has resulted in a major impact on the electronics industry in Taiwan. Taguchi based experimental design is used to determine the optimal process parameters for the suggested material during stencil printing. The Kolmogorov-Smirnov test in used to determine if data collected follows the normal distribution. Signal to noise ratio and Analysis of Variance (ANOVA) are also conducted to explore the influence of several factors on the amount of solder paste deposited. The reproducibility of data from the combination of optimal process parameters is verified by the confirmation test. Finally, through the response surface method, the influence of engineering change can be determined. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。