查詢結果分析
相關文獻
- 電力系統負載模型參數之研究
- 臺電電力系統負載特性研究
- 以監錄量測法發展的負載模型與參數確認
- 台電系統負載模型參數量測與驗證(一):動態負載模型之建立與參數辨識
- Damping Subsynchronous Oscillations by Static Reactive Power Compensators with Load Effect Considered
- Optimal Design of Large Grounding Grids Based on Simulated Annealing Method
- 物流中心物品儲位指派之研究
- 最佳化排課系統之建立
- 利用特徵值分析法探討負載模型對臺電系統低頻振盪之影響
- A Practical Interconnect-Driven Design Methodology for Low Power ASIC Designs
頁籤選單縮合
| 題 名 | 電力系統負載模型參數之研究=A Study of Load Model Parameters for Power Systems |
|---|---|
| 作 者 | 曾國雄; 黃逢佑; 高文秀; | 書刊名 | 臺北科技大學學報 |
| 卷 期 | 40:1 2007.03[民96.03] |
| 頁 次 | 頁17-26 |
| 分類號 | 448.115 |
| 關鍵詞 | 負載模型; 元件聚集法; 監錄量測法; 模擬退火法; Load model; Component-based approach; Measurement-based approach; Simulated annealing; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 本文首先利用元件聚集法,搜集變電所負載特性及負載組成比例,輸入負載組合程式(LOADSYN),獲得變電所之負載模型參數,並使用監錄量測法,搜集臺電公司近兩年變電所監錄之資料,利用模擬退火法求得近似最佳解或整體最佳解的能力,獲得變電所之負載模型參數。利用元件聚集法與監錄量測法求得之參數,分別模擬其波形並與實際量測之波形作一比較,本研究結果顯示以監錄量測法求得之負載模型參數較具準確性。 |
| 英文摘要 | This paper adopts Component-based Approach to collect load characteristics and load compositions of substation. We apply it to Load Model Synthesis Computer Software (LOADSYN) to obtain the load model parameters, and use Measurement-based Approach to collect the recent two years' data that recorded by Taipower. Utilize Simulate Annealing algorithm can find out the global or near global optimum solutions to obtain the load model parameters of substations. Finally, we use foregoing parameters to simulate and compare with field measurement. The results show load model parameters obtained by Measurement-based Approach is better than Component-based Approach. |
本系統中英文摘要資訊取自各篇刊載內容。