查詢結果分析
來源資料
相關文獻
- Investigation of the Electromagnetic Interference Effect on a Conduction Wire in a Schmitt Trigger Circuit
- A Theoretical and Experimental Investigation into the EMI-induced Noise Spectrum of a BJT Amplifier
- 切換式電源供應器之電磁干擾濾波器設計
- EMI電磁干擾
- EMC防制對策之應用
- 量產品電磁干擾量測值之統計與量測不確定度之關係
- 汽、機車之電磁干擾測試
- 通訊產品電磁干擾模擬應用方法之探討--檢視線性與非線性方法估算輻射雜訊
- Application of Wavelets Techniques and Is-Spice for Electromagnetic Interference
- 電磁干擾屏蔽探討
頁籤選單縮合
題名 | Investigation of the Electromagnetic Interference Effect on a Conduction Wire in a Schmitt Trigger Circuit=施密特觸發器電子電路的電磁輻射干擾研究 |
---|---|
作 者 | 蔡漢彰; | 書刊名 | 師大學報. 數理與科技類 |
卷期 | 51:1 民95.04 |
頁次 | 頁1-19 |
分類號 | 448.5 |
關鍵詞 | 電磁干擾; 施密特觸發器; 起動轉態電壓; 輻射功率; 傳導線; CW; EMI; Radiated power; Schmitt trigger; Threshold transfer voltages; |
語文 | 英文(English) |
中文摘要 | 本研究以實際設計的施密特觸發器的電子電路,得其二個起動轉態電壓V1 與V2,再從電磁干擾(EMI)理論及實際量測結果去証實電磁干擾的影響函數參數,進而量化其干擾量。此量化結果顯示EMI 的干擾量與干擾頻率及干擾振幅有關,較高的干擾頻率及干擾振幅有較大的輸出電壓Vrms-out,此與本文所推導的EMI 理論相吻合。 |
英文摘要 | In this study of the Schmitt trigger, the researcher initially designed an electrical circuit and then determined two threshold transfer voltages, V1 and V2. From experimental results and electromagnetic interference [EMI] theory, it was hypothesized and verified that the degree of influence of EMI is a function of R1, R2, Rc1, Re, B1, B2, Ie1, Ie2 and of the amount of radiated power. Furthermore, the degree of influence of the EMI was quantified. The quantified data reveal that the influence of the EMI is related to the interference frequency and interference amplitude. Specifically, higher frequencies and greater amplitudes of interference tend to have a greater influence upon the output Vrms-out. The present results are clearly in agreement with those predicted by EMI theory. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。